Main Content

La traduzione di questa pagina non è aggiornata. Fai clic qui per vedere l'ultima versione in inglese.

Verifica del modello

Blocchi per l'autoverifica dei modelli, come Check Input Resolution

Utilizzare i blocchi della libreria Verifica del modello per creare modelli autoconvalidanti, controllando inoltre se i segnali rispettano i limiti specificati durante la simulazione.

Blocchi

AssertionCheck whether signal is zero
Check Dynamic GapCheck that gap of possibly varying width occurs in range of signal's amplitudes
Check Dynamic RangeCheck that signal falls inside range of amplitudes that varies from time step to time step
Check Static GapCheck that gap exists in signal's range of amplitudes
Check Static RangeCheck that signal falls inside fixed range of amplitudes
Check Discrete GradientCheck that absolute value of difference between successive samples of discrete signal is less than specified value
Check Dynamic Lower BoundCheck that one signal is always less than another signal
Check Dynamic Upper BoundCheck that one signal is always greater than another signal
Check Input ResolutionCheck that input signal has specified resolution
Check Static Lower BoundCheck that signal is greater than (or optionally equal to) static lower bound
Check Static Upper BoundCheck that signal is less than (or optionally equal to) static upper bound