Main Content

Verbose

Verbose status messages for external mode execution progress and updates

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Verbose parameter enables status messages for external mode execution progress and updates. These messages appear in the Diagnostic Viewer or in the MATLAB® command window.

Dependencies

None

Settings

off (default) | on

Enable this parameter to show status messages for external mode execution progress and updates.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to Altera Cyclone V SoC development kit and click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. Set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

  5. From the External mode group, enable the Verbose selection and click Apply.

  6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2006a