SoC Builder

Build, load, and execute multicore application models on Infineon AURIX TC4x hardware boards

Since R2024b

Description

Add-On Required: This feature requires one of these add-ons.

• Embedded Coder Support Package for Infineon AURIX TC4x Microcontrollers
• Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers

The SoC Builder tool steps through the various stages for building and executing a SoC multicore application model on Infineon AURIX TC4x hardware board

Using this tool, you can:

• Review the model information provided to the tool.

• Choose between different build actions.

• Set up a folder to store all generated files.

• Map model tasks to interrupt service routines.

• Configure the peripheral register settings.

• Validate that the model has all required components for generating a programming file.

• Build the model using Synopsys^® MetaWare, or TASKING^® SmartCode for TriCore^® tool families.

• Load the programming file to your target hardware board.

• Run the application.

Open the SoC Builder

• Simulink^® Toolstrip: On the Hardware tab, click Configure, Build, Deploy & Start or Configure, Monitor & Tune.

  

• MATLAB^® command prompt: Enter socBuilder('modelname').

Examples

• Getting Started with Multicore Modeling and Targeting for Infineon AURIX TC4x Microcontrollers
• Getting Started with PPU Accelerator for Infineon AURIX TC4x Microcontrollers
• Analyze Sensorless Observers for Field-Oriented Control Using Multiple Cores of Infineon AURIX
• Accelerate AI Based Software Development on Infineon AURIX TC4x Microcontroller
• Custom Storage Class for Infineon AURIX TC4x Microcontrollers

Programmatic Use

socBuilder('modelname') opens SoC Builder and loads the specified model into the tool.

Version History

Introduced in R2024b