Executable file for TriCore0

Path of executable file for TriCore0

Since R2026a

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Device

Description

For each auxiliary processing unit of Infineon AURIX microcontrollers selected under Hardware board settings, one executable file for the principal core (TriCore0) is selected automatically.

You can also create custom executable file for TriCore0 and select the file path using the Browse button.

The custom executable file path provided can be absolute or relative. If the path provided is relative, the path must be selected with respect to the folder where the model is present or the code generation folder.

Dependencies

To enable this parameter, select Pre-load TriCore0 with custom executable which enables current processing unit parameter.

Settings

$(AURIX_TC3XX_SHARED_ROOT_DIR)\TriCore0Executables\TC37x\TriCore0ExecutableToEnableTriCore#.hex (default)

The default file for Infineon AURIX TC3x microcontrollers is $(AURIX_TC3XX_SHARED_ROOT_DIR)\TriCore0Executables\TC37x\TriCore0ExecutableToEnableTriCore#.hex.

The default file for Infineon AURIX TC4x microcontrollers is $(AURIX_TC4XX_SHARED_ROOT_DIR)\TriCore0Executables\TC49x\TriCore0ExecutableToEnableTriCore#.hex.

Recommended Settings

ApplicationSetting
DebuggingNo impact
TraceabilityNo impact
EfficiencyNo impact
Safety precautionNo impact

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2026a

See Also

Topics