Main Content

Accept all messages (in FIFO 0)

Allow all CAN messages in FIFO 0

Since R2024b

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / CAN

Description

Enable this parameter to allow all CAN messages in FIFO 0. If it is disabled, then you can select and allow only the required CAN messages.

Settings

off | on

Enable this parameter to allow all CAN messages in FIFO 0. If it is disabled, then you can select and allow only the required CAN messages.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2024b