Configure Coils
Configure coils to read data from the coil register
Since R2025a
Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / UART/USART
Description
Select the Configure Coils parameter to configure the starting address and the number of coil registers.
Dependencies
To
enable this parameter, set Mode to
server.
Settings
off (default) |
o
Coil Register Parameters
| Parameter | Description | Default Value |
|---|---|---|
Start address | Starting address of the coil register Dependencies: To enable this parameter, select Configure Coils. | 0 |
| Quantity | Number of coil registers Dependencies: To enable this parameter, select Configure Coils. | 1 |
Recommended Settings
No recommendation.
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2025a
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: United States.
You can also select a web site from the following list
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)