Main Content

UDP Send

Send UDP packets to UDP host

Since R2022b

expand all in page

Add-On Required: This feature requires the Embedded Coder Support Package for STMicroelectronics STM32 Processors add-on.

  • UDP Send block

Libraries:
Embedded Coder Support Package for STMicroelectronics STM32 Processors / STM32F4xx Based Boards
Embedded Coder Support Package for STMicroelectronics STM32 Processors / STM32F7xx Based Boards
Embedded Coder Support Package for STMicroelectronics STM32 Processors / STM32H7xx Based Boards
Embedded Coder Support Package for STMicroelectronics STM32 Processors / STM32F2xx Based Boards

Description

The UDP Send block sends an input vector as UDP packets over an IP network port to a UDP host. Use the block for stateless and connectionless data transmission.

The block sends packets from the port number specified in the Local IP Port (-1 for automatic port assignment) parameter.

Specify the IP address and the port number of the receiving host in the Remote IP address (255.255.255.255 for broadcast) and Remote IP Port parameter.

You can choose to send the UDP packets in blocking or non-blocking mode.

Note

Ensure to configure the Ethernet options in STM32CubeMX project. For more, see Configure Ethernet Options in STM32CubeMX for STM32 Processor Based Boards.

Ports

Input

expand all

The port accepts an array and sends it as UDP packets over an IP network port to the receiving host.

Data Types: int8 | uint8 | int16 | uint16 | int32 | uint32 | single | double | Boolean

Output

expand all

At each sample time, the port outputs 0 when the length of data transmitted is greater than or equal to the length specified in the Data size (N) parameter. A value of 0 indicates that the requested data is transmitted at the given time step. Otherwise, it outputs a nonzero value, indicating that no new data is available.

Dependencies

To enable this port, select the Output error status parameter.

Data Types: uint16

Parameters

expand all

Specify the IP address to which the block sends the UDP packets. This parameter does not accept host name as input. To broadcast packets to all the receiving hosts, specify 255.255.255.255.

Specify the port number of the application from which you want to send the packets.

The value, -1, sets the local port number to a random available port number and uses that port to send the packets. If the receiving host expects UDP packets from a particular port number, specify that number.

Specify the port number of the application on the receiving host to which you want to send the packets. Match the remote port number with the local port number of the receiving host.

  • on — When you select this parameter, the send operation runs in the Blocking mode. If packet received in the previous time step is sent, the block accepts data from the input port. If the send operation is in progress, the block waits for the packet to be sent, and then it accepts data from the input port.

    If the connection between the sending and the receiving host is not established, or if the connection is lost, the data at the input port is dropped.

    A task overrun occurs if the target hardware is still waiting for the requested data to be sent when the next send operation is scheduled to begin. To fix overruns:

    • Increase the sample time of input data.

    • Reduce the length of data at the input port.

  • off — When you clear this parameter, the send operation runs in the Non-blocking mode. When sending packets, if the transmission of the packets received in the previous time step is still in progress, the data at the input port at the given time step is dropped.

    If the connection between the sending and the receiving host is not established, or if the connection is lost, the data at the input port is dropped.

Select this parameter to display the error status during data transmission.

When you select the Output error status parameter, the block configures an output port. The port on the block is labeled as Status, indicating that the block outputs the status of the read operation at the output port.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2022b

See Also

| |