RSIB Passport for VISA allows you to control and exchange data remotely with Rohde & Schwarz spectrum and network analyzers over a local area network. The RSIB interface is supported by National Instruments VISA only. It also requires the Rohde & Schwarz VISA passport. You can use MATLAB® and Rohde & Schwarz spectrum and network analyzers to perform complex data analysis on measured telecommunication signals and to verify simulated data against real measurement data.
You create a VISA-RSIB object with the
visa function. Each VISA-RSIB object
is associated with an instrument connected to your computer.
visa requires the vendor name and the resource
name as input arguments. The only supported vendor name is
The resource name consists of the IP address or host name of the instrument.
You can find the VISA-RSIB resource name for a given instrument with
the configuration tool provided by your vendor, or with the
instrhwinfo function. (In place of
the resource name, you can use an alias as defined with your VISA
vendor configuration tool.) As described in Connecting to the Instrument, you
can also configure properties during object creation.
Before you create a VISA object, you must find the instrument in the appropriate vendor VISA explorer. When you find the instrument configured, note the resource string and create the object using that information. For example, to create a VISA-RSIB object that uses National Instruments® VISA and associated with an instrument with IP address 192.168.1.33,
vr = visa('ni','RSIB::192.168.1.33::INSTR');
The VISA-RSIB object
vr now exists in the MATLAB workspace.
To open a connection to the instrument, type:
You can display the class of
vr with the
whos vr Name Size Bytes Class vr 1x1 884 visa object Grand total is 16 elements using 884 bytes
After you create the VISA-RSIB object, the properties listed below are automatically assigned values. These properties provide descriptive information about the object based on its class type and address information.
VISA-RSIB Descriptive Properties
You can display the values of these properties for
vr.Name ans = VISA-RSIB0-192.168.1.33
vr.RsrcName ans = RSIB0::192.168.1.33::INSTR
vr.Type ans = visa-RSIB
The VISA-RSIB object provides you with a convenient display that summarizes important address and state information. You can invoke the display summary these three ways:
Type the VISA-RSIB object at the command line.
Exclude the semicolon when creating a VISA-RSIB object.
Exclude the semicolon when configuring properties using the dot notation.
You can also display summary information via the Workspace browser by right-clicking an instrument object and selecting Display Summary from the context menu.
The display summary for the VISA-RSIB object
VISA-RSIB Object Using NI Adaptor : VISA-RSIB-192.168.1.33 Communication Address RemoteHost: 192.168.1.33 Communication State Status: closed RecordStatus: off Read/Write State TransferStatus: idle BytesAvailable: 0 ValuesReceived: 0 ValuesSent: 0
The VISA-RSIB address consists of
Remote host of the instrument
You specify the address property value via the resource name during VISA-RSIB object creation. The instrument address property is given below.
VISA-RSIB Address Property
Specify the remote host name or IP address of the instrument
The property is automatically updated with the specified resource name value when you create the VISA-RSIB object.
You can display the address property value for the VISA-RSIB
vr, created in Creating a VISA-RSIB Object.
fopen(vr) vr.RemoteHost ans = 192.168.1.33