Compute mean value of input phasor over a running window of one cycle of specified frequency
Simscape / Electrical / Specialized Power Systems / Sensors and Measurements
The Mean (Phasor) block filters an AC sinusoidal component that is added to the DC component of a phasor signal. Filtering is performed by computing the average values of real and imaginary parts of the input phasor, using a running window of one cycle of the specified fundamental frequency.
Specify the fundamental frequency, in hertz, to determine the
period (1/F) of the running average window. Default
Specify the initial DC component of the input signal. If the
input is a vectorized signal, specify a 1-by-N vector, where each
value corresponds to a particular input. Default is
Specify the sample time of the block, in seconds. Set to
implement a continuous block. Default is
|Sample Time||Specified in the Sample Time parameter|
Continuous if Sample Time = 0
|Scalar Expansion||Yes, of the parameters|
|States||Two states per filter|
shows the use of the Mean (Phasor) block.