predict
Simulate and evaluate fitted SimBiology model
Syntax
Description
[
returns simulation results ynew
,parameterEstimates
]=
predict(resultsObj
)ynew
and parameter estimates
parameterEstimates
of a fitted SimBiology^{®} model.
[
returns simulation results ynew
,parameterEstimates
]=
predict(resultsObj
,data
,dosing
)ynew
and estimated parameter values
parameterEstimates
from evaluating the fitted SimBiology
model using the specified data
and dosing
information.
During simulations, predict
uses the parameter values in the
resultsObj.ParameterEstimates
property. Use this method when
you want to evaluate the fitted model and predict responses using new data and/or
dosing information.
[
simulates the fitted model and applies the specified variants to each
simulation.ynew
,parameterEstimates
]=
predict(resultsObj
,data
,dosing
,'Variants',v
)
Examples
Evaluate Fitted SimBiology Model
This example uses the yeast heterotrimeric G protein model and experimental data reported by [1]. For details about the model, see the Background section in Parameter Scanning, Parameter Estimation, and Sensitivity Analysis in the Yeast Heterotrimeric G Protein Cycle.
Load the G protein model.
sbioloadproject gprotein
Store the experimental data containing the time course for the fraction of active G protein.
time = [0 10 30 60 110 210 300 450 600]'; GaFracExpt = [0 0.35 0.4 0.36 0.39 0.33 0.24 0.17 0.2]';
Map the appropriate model component to the experimental data. In other words, indicate which species in the model corresponds to which response variable in the data. In this example, map the model parameter GaFrac
to the experimental data variable GaFracExpt
from grpData
.
responseMap = 'GaFrac = GaFracExpt';
Create a groupedData
object based on the experimental data.
tbl = table(time,GaFracExpt); grpData = groupedData(tbl);
Use an estimatedInfo
object to define the model parameter kGd
as a parameter to be estimated.
estimatedParam = estimatedInfo('kGd');
Perform the parameter estimation.
fitResult = sbiofit(m1,grpData,responseMap,estimatedParam);
View the estimated parameter value of kGd
.
fitResult.ParameterEstimates
ans=1×3 table
Name Estimate StandardError
_______ ________ _____________
{'kGd'} 0.11307 3.4439e05
Suppose you want to simulate the fitted model using different output times than those in the training data. You can use the predict
method to do so.
Create a new variable T
with different output times.
T = [0;10;50;80;100;150;300;350;400;450;500;550];
Use the predict
method to simulate the fitted model on the new time points. No dosing was specified when you first ran sbiofit
. Hence, you cannot use any dosing information with the predict
method, and an empty array must be specified as the third input argument.
ynew = predict(fitResult,T,[]);
Plot the simulated data with the new output times.
sbioplot(ynew);
Estimate CategorySpecific PK Parameters
This example shows how to estimate categoryspecific (such as young versus old, male versus female) PK parameters using the profile data from multiple individuals using a twocompartment model. The parameters to estimate are the volumes of central and peripheral compartment, the clearance, and intercompartmental clearance.
The synthetic data used in this example contains the time course of plasma concentrations of multiple individuals after a bolus dose (100 mg) measured at different times for both central and peripheral compartments. It also contains categorical variables, namely Sex and Age.
clear
load('sd5_302RAgeSex.mat');
Convert the data set to a groupedData object, which is the required data format for the fitting function sbiofit. A groupedData object allows you to set independent variable and group variable names (if they exist). Set the units of the ID, Time, CentralConc, PeripheralConc, Age, and Sex variables. The units are optional and only required for the UnitConversion feature, which automatically converts matching physical quantities to one consistent unit system.
gData = groupedData(data); gData.Properties.VariableUnits = {'','hour','milligram/liter','milligram/liter','',''};
The IndependentVariableName and GroupVariableName properties have been automatically set to the Time and ID variables of the data.
gData.Properties
ans = struct with fields:
Description: ''
UserData: []
DimensionNames: {'Row' 'Variables'}
VariableNames: {'ID' 'Time' 'CentralConc' 'PeripheralConc' 'Sex' 'Age'}
VariableTypes: ["double" "double" "double" "double" "categorical" "categorical"]
VariableDescriptions: {}
VariableUnits: {'' 'hour' 'milligram/liter' 'milligram/liter' '' ''}
VariableContinuity: []
RowNames: {}
CustomProperties: [1x1 matlab.tabular.CustomProperties]
GroupVariableName: 'ID'
IndependentVariableName: 'Time'
For illustration purposes, use the first five individual data for training and the 6th individual data for testing.
trainData = gData([gData.ID < 6],:); testData = gData([gData.ID == 6],:);
Display the response data for each individual in the training set.
sbiotrellis(trainData,'ID','Time',{'CentralConc','PeripheralConc'});
Use the builtin PK library to construct a twocompartment model with infusion dosing and firstorder elimination where the elimination rate depends on the clearance and volume of the central compartment. Use the configset object to turn on unit conversion.
pkmd = PKModelDesign; pkc1 = addCompartment(pkmd,'Central'); pkc1.DosingType = 'Bolus'; pkc1.EliminationType = 'linearclearance'; pkc1.HasResponseVariable = true; pkc2 = addCompartment(pkmd,'Peripheral'); model = construct(pkmd); configset = getconfigset(model); configset.CompileOptions.UnitConversion = true;
Assume every individual receives a bolus dose of 100 mg at time = 0.
dose = sbiodose('dose','TargetName','Drug_Central'); dose.StartTime = 0; dose.Amount = 100; dose.AmountUnits = 'milligram'; dose.TimeUnits = 'hour';
The data contains measured plasma concentration in the central and peripheral compartments. Map these variables to the appropriate model components, which are Drug_Central and Drug_Peripheral.
responseMap = {'Drug_Central = CentralConc','Drug_Peripheral = PeripheralConc'};
Specify the volumes of central and peripheral compartments Central and Peripheral, intercompartmental clearance Q12, and clearance Cl_Central as parameters to estimate. The estimatedInfo object lets you optionally specify parameter transforms, initial values, and parameter bounds. Since both Central and Peripheral are constrained to be positive, specify a logtransform for each parameter.
paramsToEstimate = {'log(Central)', 'log(Peripheral)', 'Q12', 'Cl_Central'}; estimatedParam = estimatedInfo(paramsToEstimate,'InitialValue',[1 1 1 1]);
Use the 'CategoryVariableName' property of the estimatedInfo object to specify which category to use during fitting. Use 'Sex' as the group to fit for the clearance Cl_Central and Q12 parameters. Use 'Age' as the group to fit for the Central and Peripheral parameters.
estimatedParam(1).CategoryVariableName = 'Age'; estimatedParam(2).CategoryVariableName = 'Age'; estimatedParam(3).CategoryVariableName = 'Sex'; estimatedParam(4).CategoryVariableName = 'Sex'; categoryFit = sbiofit(model,trainData,responseMap,estimatedParam,dose)
categoryFit = OptimResults with properties: ExitFlag: 1 Output: [1x1 struct] GroupName: [] Beta: [8x5 table] ParameterEstimates: [20x6 table] J: [40x8x2 double] COVB: [8x8 double] CovarianceMatrix: [8x8 double] R: [40x2 double] MSE: 0.1047 SSE: 7.5349 Weights: [] LogLikelihood: 19.0159 AIC: 54.0318 BIC: 73.0881 DFE: 72 DependentFiles: {1x3 cell} Data: [40x6 groupedData] EstimatedParameterNames: {'Central' 'Peripheral' 'Q12' 'Cl_Central'} ErrorModelInfo: [1x3 table] EstimationFunction: 'lsqnonlin'
When fitting by category (or group), sbiofit always returns one results object, not one for each category level. This is because both male and female individuals are considered to be part of the same optimization using the same error model and error parameters, similarly for the young and old individuals.
Plot the categoryspecific estimated results. For the Cl_Central and Q12 parameters, all males had the same estimates, and similarly for the females. For the Central and Peripheral parameters, all young individuals had the same estimates, and similarly for the old individuals.
plot(categoryFit);
As for testing purposes, simulate the responses of the 6th individual who is an old male. Since you have estimated one set of parameters for the Age category (young versus old), and another set for Sex category (male versus female), you can simulate the responses of an old male even though there is no such individual in the training data.
Use the predict method to simulate the responses. ynew contains simulation data and paramestim contains parameter estimates used during simulation.
[ynew,paramestim] = predict(categoryFit,testData,dose);
Plot the simulated responses of the old male.
sbioplot(ynew);
The paramestim variable contains the estimated parameters used by the predict method. The parameter estimates for corresponding categories were obtained from the categoryFit.ParameterEstimates property. Specifically, Central and Peripheral parameter estimates are obtained from the Old group, and Q12 and Cl_Central parameter estimates are obtained from the Male group.
paramestim
paramestim=4×6 table
Name Estimate StandardError Group CategoryVariableName CategoryValue
______________ ________ _____________ _____ ____________________ _____________
{'Central' } 1.1993 0.0046483 6 {'Age'} Old
{'Peripheral'} 0.55195 0.015098 6 {'Age'} Old
{'Q12' } 1.4969 0.074321 6 {'Sex'} Male
{'Cl_Central'} 0.56363 0.0072862 6 {'Sex'} Male
Overlay the experimental results on the simulated data.
figure; plot(testData.Time,testData.CentralConc,'LineStyle','none','Marker','d','MarkerEdgeColor','b'); hold on plot(testData.Time,testData.PeripheralConc,'LineStyle','none','Marker','d','MarkerEdgeColor','r'); plot(ynew.Time,ynew.Data(:,1),'b'); plot(ynew.Time,ynew.Data(:,2),'r'); hold off legend({'OBS1(CentralConc)','OBS2(PeripheralConc)',... 'PRED1(Central.Drug\_Central)','PRED2(Peripheral.Drug\_Peripheral)'});
Input Arguments
resultsObj
— Estimation results
OptimResults
object  NLINResults
object
Estimation results, specified as an OptimResults object
or
NLINResults object
, which
contains estimation results returned by sbiofit
. It must be a
scalar object.
data
— Output times or grouped data
vector  cell array of vectors  groupedData
object
Output times or grouped data, specified as a vector, or cell array of
vectors of output times, or groupedData
object
.
If it is a vector of time points, predict
simulates
the model with new time points using the parameter estimates from the
results object resultsObj
.
If it is a cell array of vectors of time points,
predict
simulates the model n
times using the output times from each time vector, where
n is the length of data
.
If it is a groupedData
object, it must have an
independent variable such as Time. It must also have a group variable if the
training data used for fitting has such variable. You can use a
groupedData
object to query different combinations of
categories if the resultsObj
contains parameter
estimates for each category. predict
simulates the model
for each group with the specified categories. For instance, suppose you have
a set of parameter estimates for sex category (males versus females), and
age category (young versus old) in your training data. You can use
predict
to simulate the responses of an old male (or
any other combination) although such patient may not exist in the training
data.
If the resultsObj
is from estimating
categoryspecific parameters, data
must be a
groupedData
object.
Note
If UnitConversion
is turned on for the underlying
SimBiology model that was used for fitting and data
is a groupedData
object, data
must specify valid variable units via
data.Properties.VariableUnits
property. If it is
a numeric vector or cell array of vectors of time points,
predict
uses the model’s
TimeUnits
.
dosing
— Dosing information
[]
 {}
 2D matrix of dose objects  cell vector of dose objects
Dosing information, specified as empty []
or {}
, 2D matrix or cell vector of SimBiology dose objects (ScheduleDose object
or RepeatDose object
).
If dosing
is empty, no doses are applied during simulation, even if the model has active doses.
For a matrix of dose objects, it must have a single row or one row per group in the input data. If it has a single row, the same doses are applied to all groups during simulation. If it has multiple rows, each row is applied to a separate group, in the same order as the groups appear in the input data. Multiple columns are allowed so that you can apply multiple dose objects to each group.
For a cell vector of doses, it must have one element or one element per group in the input
data. Each element must be []
or a vector of doses. Each element of the
cell is applied to a separate group, in the same order as the groups appear in the input
data.
In addition to manually constructing dose objects using sbiodose
, if the input groupedData
object has dosing
information, you can use the createDoses
method to construct
doses.
Dose objects of the dosing
input must be consistent with the original dosing data used with sbiofit
. The objects must have the same values for dose properties (such as TargetName
) or must be parameterized in the same way as the original dosing data. For instance, suppose that the original dosing matrix has two columns of doses, where the doses in the first column target species x and those in the second column target species y. Then dosing
must have doses in the first column targeting species x and those in the second column targeting species y. A parameterized dose example is as follows. Suppose that the Amount
property of a dose used in the original sbiofit
call is parameterized to a modelscoped parameter 'A'
. All doses for the corresponding group (column) in the dosing
matrix input must have the Amount
property parameterized to 'A'
.
The number of rows in the dosing
matrix or number of elements in the dosing
cell vector and the number of groups or output time vectors in data
determine the total number of simulation results in the output ynew
. For details, see the table in the ynew
argument description.
Note
If UnitConversion
is turned on for the underlying SimBiology model that was used for fitting, dosing
must specify valid amount and time units.
v
— Variants to apply
[]
 {}
 2D matrix of variants  cell vector of variants
Variants to apply, specified as an empty array ([]
, {}
), 2D matrix or cell vector of variant objects.
If you do not specify this argument, the function has the following behavior depending on whether the second input argument (data
) is specified also or not.
If
data
is not specified, the function applies the groupspecific variants from the original call tosbiofit
.If
data
is a vector or cell array of output times, the function does not apply the groupspecific variants.If
data
is agroupedData
object, the function applies variants only to groups whose group identifier matches a group identifier in the original training data that was used in the call tosbiofit
.
Note
The baseline variants that were specified by the variants positional input argument in the original call to
sbiofit
are always applied to the model, and they are applied before any groupspecific variants.If there are no baseline variants, that is, you did not specify the
variants
input when callingsbiofit
, thepredict
function still applies the model active variants if there are any.
If the argument value is []
or {}
, the function applies no groupspecific variants.
If it is a matrix of variants, it must have either one row or one row per group. Each row is
applied to a separate group, in the same order as the groups appear in
data
or dosing
. If it has a single row, the
same variants are applied to all groups during simulation. If there are multiple columns,
the variants are applied in order from the first column to the last.
If it is a cell vector of variant objects, the number of cells must be one or must match
the number of groups in the input data. Each element must be []
or a
vector of variants. If there is a single cell containing a vector of variants, they are
applied to all simulations. If there are multiple cells, the variants in the
ith cell are applied to the simulation of the ith
group.
The function defines the number of groups by examining the data
, and
dosing
input arguments.
data
can have1
or N groups.If
data
anddosing
arguments are not specified, then the default data and dosing are determined as follows:For unpooled fits, they are the data and dosing for the single group associated with that fit results.
For all other fits, they are the entire set of data and dosing associated with the call to
sbiofit
.
Output Arguments
ynew
— Simulation results
vector of SimData
objects
Simulation results, returned as a vector of SimData
objects. The states reported in ynew
are the states that were included in the responseMap
input argument of sbiofit
as well as any other states listed in the StatesToLog
property of the runtime options (RuntimeOptions
) of the SimBiology model.
The total number of simulation results in ynew
depends on the number of groups or output time vectors in data
and the number of rows in the dosing
matrix.
Number of groups or output time vectors in data  Number of rows in the dosing matrix  Simulation results 


 The total number of No doses are applied during simulation. 

 The total number of The given row of doses is applied during the simulation. 
 N  The total number of Each row of 
N 
 The total number of No doses are applied during simulation. 
N 
 The total number of The same row of doses is applied to each simulation. 
N  N  The total number of Each row of 
M  N  The function throws an error when M ≠ N. 
parameterEstimates
— Estimated parameter values
table
Estimated parameter values, returned as a table. This is identical to
resultsObj.ParameterEstimates
property. The
predict
method uses these parameter values during
simulation.
References
[1] Yi, TM., Kitano, H., and Simon, M. (2003). A quantitative characterization of the yeast heterotrimeric G protein cycle. PNAS. 100, 10764–10769.
Version History
Introduced in R2014a
See Also
Comando MATLAB
Hai fatto clic su un collegamento che corrisponde a questo comando MATLAB:
Esegui il comando inserendolo nella finestra di comando MATLAB. I browser web non supportano i comandi MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
 América Latina (Español)
 Canada (English)
 United States (English)
Europe
 Belgium (English)
 Denmark (English)
 Deutschland (Deutsch)
 España (Español)
 Finland (English)
 France (Français)
 Ireland (English)
 Italia (Italiano)
 Luxembourg (English)
 Netherlands (English)
 Norway (English)
 Österreich (Deutsch)
 Portugal (English)
 Sweden (English)
 Switzerland
 United Kingdom (English)