Configure Coils

Configure coil register parameters

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Modbus properties

Description

Select this parameter to configure the starting address and the number of coil registers.

Dependencies

To enable this parameter, set Mode to Server.

Settings

on (default) | off

Coil Register Parameters

Parameter	Description	Default Value
Start address	Starting address of the coil register Dependencies: To enable this parameter, select Configure Coils.	0
Quantity	Number of coil registers Dependencies: To enable this parameter, select Configure Coils.	1

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2020b