ASCII Decode
Libraries:
Simulink Real-Time /
RS232
Description
The ASCII Decode block parses an input character vector according to a
format specifier similar to scanf
and makes converted values
available to the real-time
application.
For more information, see RS-232 Serial Communication and RS-232 Legacy Drivers.
Examples
ASCII Encoding/Decoding Resync Loopback Test
Use the ability of the FIFO Read HDRS block to resynchronize after being repeatedly disabled and apply this ability to resolve errors such as when a message is only partially complete at the time the read is attempted.
Binary Encoding/Decoding Resync Loopback Test
Use the ability of the FIFO Read BINARY block to handle messages that are interrupted and only partially complete.
Simple ASCII Encoding/Decoding Loopback Test (with Baseboard Blocks)
Convert a single floating point number to ASCII and transmit the value over a serial link.
ASCII Encoding/Decoding Loopback Test (with Baseboard Blocks)
Send ASCII data over a serial link.
ASCII Encoding/Decoding Resync Loopback Test (with Baseboard Blocks)
Use the ability of the FIFO Read HDRS block to resynchronize after being repeatedly disabled and apply this ability to resolve errors such as when a message is only partially complete at the time the read is attempted.
Binary Encoding/Decoding Loopback Test (with Baseboard Blocks)
Send Binary data over a serial link.
Binary Encoding/Decoding Resync Loopback Test (with Baseboard Blocks)
Use the ability of the FIFO Read BINARY block to handle messages that are interrupted and only partially complete.
Ports
Input
D — Input vector to parse
character vector
The input vector can be either 8-bit or 16-bit and signed or unsigned. If the data format is 16-bit, the block ignores the upper 8 bits of each entry.
Data Types: int8
| uint8
| int16
| uint16
Output
1 — Numbered ports that send Simulink® values
numeric
Output ports corresponding to items in Format string.
Dependency
Number of variables determines the number of output ports.
Data Types: double
| int8
| uint8
| int16
| uint16
| int32
| uint32
Parameters
Format string — Format specifier for parsing input vector
%d\r
(default) | %c
| %i
| %o
| %u
| %x
| %e
| %f
| %g
Enter a scanf
like format string. Each format
specifier such as %d
must match a corresponding part of
the input vector. Literal strings in the format must match the first
character plus the number of characters. The format specifiers follow the
normal description for scanf
.
An example format string is:
'alpha %d bravo %f\n'
Programmatic Use
Block Parameter:
format |
Number of variables — Number of output ports for this block
1
(default) | integer
Enter the number of output ports for this block. For example:
If Format string has the value of %xmore
text%x
and the input vector for the block has
cdmabcdefgh90
, you must specify the value of the
Number of variables parameter as 2.
The first variable is assigned the value 0xcd
. Next,
the character vector mabcdefgh
is considered a match to
more text
because:
The first character for both character vectors is
m
.Both character vectors have the same number of characters.
The second variable is then assigned the value 0x90
.
The character vector mabcdefgh
does not have to match
exactly the value of Format string. This behavior is
different from the behavior for scanf
, which requires an
exact match.
Programmatic Use
Block Parameter:
nvars |
Variable types — Simulink data types allowed for output ports
{'double'}
(default) | {'int8'}
| {'uint8'}
| {'int16}
| {'uint16'}
| {'int32'}
| {'uint32'}
A cell vector with the same number of elements as specified in Number of variables can specify a different data type for each output port. A single element is replicated. For example:
nvars=3
{ }
— The three outputs are doubles.
{'uint8'}
— The three outputs are
uint8
.
{'uint16', 'double', 'uint8'}
— The first output
is a uint16
, the second output is a
double
, and the third output is a
uint8
.
Programmatic Use
Block Parameter:
varids |
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Version History
Introduced in R2020b
Comando MATLAB
Hai fatto clic su un collegamento che corrisponde a questo comando MATLAB:
Esegui il comando inserendolo nella finestra di comando MATLAB. I browser web non supportano i comandi MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)