Main Content

SPDT Switch (Three-Phase)

Three-phase single-pole double-throw switch

  • SPDT Switch (Three-Phase) block

Libraries:
Simscape / Electrical / Switches & Breakers

Description

The SPDT Switch (Three-Phase) block models a three-phase single-pole double-throw switch that uses an external signal to connect each phase of the port ~1 with the corresponding phase of either port ~2 or ~3.

The table shows how the external signal vT controls the block behavior.

ConditionBlock BehaviorResistance Parameter Used
vT ThresholdEach phase of port ~1 is connected to the corresponding phase of port ~2 via internal resistance. Port ~3 is unconnected.Open conductance (port ~1 to port ~3). Closed resistance (port ~1 to port ~2)
vT > ThresholdEach phase of port ~1 is connected to the corresponding phase of port ~3 via internal resistance. Port ~2 is unconnected.Open conductance (port ~1 to port ~2). Closed resistance (port ~1 to port ~3)

Ports

Input

expand all

Physical control port.

Dependencies

To enable this port, set Modeling option to Expanded three-phase ports | PS control port or Composite three-phase ports | PS control port.

Conserving

expand all

Expandable three-phase electrical conserving port.

Expandable three-phase electrical conserving port.

Expandable three-phase electrical conserving port.

Electrical conserving control port.

Dependencies

To enable this port, set Modeling option to Expanded three-phase ports| Electrical control port or Composite three-phase ports| Electrical control port.

Parameters

expand all

Whether to model composite or expanded three-phase ports and physical signal or electrical control ports.

Resistance between ports ~1 and ~3 when the switch is closed.

Conductance between ports ~1 and ~2 when the switch is open.

Threshold voltage for the control port vT. When the voltage is above the threshold, the switch is closed.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2013b