Hardware Implementation Pane: Altera Cyclone V SoC Development Kit and Arrow SoCKit Development Hardware Boards

To configure hardware parameters for Altera^® Cyclone^® V SoC development kit, or Arrow SoCKit development boards, follow these steps:

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to Altera Cyclone V SoC development kit.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration parameters, see Hardware Implementation Pane (Simulink).

Operating system options

Parameter	Description	Default Value
Base Rate Task Priority	Sets the static priority of the base rate task in the operating system.	40
Detect task overruns	Detect task overruns by the model execution.	disabled

Clocking

Parameter	Description	Default Value
CPU Clock Frequency	The CPU clock frequency in MHz.	533

Build Options

Parameter	Description	Default Value
Build action	Defines how Embedded Coder® responds when you build your model.	Build, load, and run

External Mode

Parameter	Description	Default Value
Communication interface	Transport layer used to exchange data between the development computer and hardware.	TCP/IP
Run external mode in a background thread	Force the external mode engine in the generated code to execute in a background task.	disabled
IP Address	IP address of the hardware board.	$(SOCFPGA_IPADDRESS)
Port	Port number on the hardware board.	17725
Verbose	Enable view of the external mode execution progress and updates in the Diagnostic Viewer.	disabled