You can configure a Simulink® model to generate code, build an executable, and then run the executable on your Intel® SoC platform. The executable runs in the Linux® environment on the ARM® Cortex-A9 processor on the Intel SoC platform.
Save a copy of your model. Keep the original model as a backup copy.
In the Hardware tab, in the Prepare group, click Hardware Settings.
In the Configuration Parameter dialog box, select the Hardware Implementation tab.
Set the Hardware board parameter to your Intel SoC platform. The parameters in the Traget hardware resources panes are automatically assigned default values for your Intel SoC platform.
In the Configuration Parameter dialog box, click Code Generation. Selecting the Intel SoC platform in the previous step automatically set the System target file parameter to
ert.tlc. Similarly, the Toolchain parameter now specifies
ARM Development Studio Altera Edition (DS-5 AE) for the build process.
Save your changes to the model.
Verify that the Intel SoC board and the host computer have a network connection.
If your host computer connects to multiple Intel SoC platform boards, disconnect the boards that you are not using.
In the Hardware tab, in the Deploy group, click Build, Deploy & Start. As the build starts, the Diagnostic Viewer starts and displays the build status.
When the executable starts running on the Intel SoC hardware, the build process opens a command window similar to the one shown here.
The executable runs in the Linux environment on a single core of the ARM Cortex-A9 processor on the Intel SoC platform.
PIL simulation and PIL-based execution profiling require single-core execution. To design a model that can run on both cores, see Multicore Processor Targets (Simulink).