C29x-ePWM X-BAR

R2026b

You can set the following parameters for the ePWM X-BAR on F29x (C29x) processors. The ePWM X-BAR routes external and internal signals to ePWM trip inputs (TRIP1 through TRIP16) for fault protection. This crossbar is specific to the C29x architecture and is separate from the Input X-BAR and Output X-BAR.

Select trip

Select the ePWM X-BAR trip signal to configure (TRIP1 through TRIP16), or Disable all.

Select trip input signals

Select the input signal routed to the selected trip output.

Trip input signals

Displays the configured input signals for each trip output. This field is read-only.

Invert TRIPx output

Invert the polarity of the selected trip output signal.