Main Content

Formula Student Vehicle

Formula student vehicle dimensions

Description

Formula Student Vehicle is one of the vehicles that you can use within the 3D simulation environment. This environment is rendered using the Unreal Engine® from Epic Games®. The Dimensions section provides the dimensions of this vehicle. The height dimensions are with respect to the vertical ground plane. The length and width dimensions are with respect to the origin of the vehicle in the vehicle coordinate system. The origin is on the ground, at the geometric center of the vehicle.

To add this type of vehicle to the 3D simulation environment:

  1. Add a Simulation 3D Vehicle or Simulation 3D Vehicle with Ground Following block to your Simulink® model.

  2. In the block, set the Type parameter to Formula student vehicle.

Dimensions

expand all

Top-down view of formula student vehicle. Its width dimension is shown.

Side view of formula student vehicle with the origin marked in orange beneath its center and its length and overhang dimensions shown. The rear overhang is 0.45 meters. The distance from the rear overhang to the origin is 1.0 meter. The distance from the origin to the front overhang is .52 meters. The front overhang is 0.91 meters.

Front view of formula student vehicle with the origin marked in orange beneath its center and its front tire width and front axle dimensions shown. The front tire width is 0.12 meters. The front axle width is 1.22 meters.

Rear view of formula student vehicle and its rear axle dimensions, and height shown. The height from the ground to the tire center is 0.24 meters. The height from the tire center to the top of the vehicle is 0.89 meters.

Sensor Mounting Locations

Formula Student Vehicle — Sensor Locations Relative to Vehicle Origin

Mounting LocationX (m)Y (m)Z (m)Roll (radian)Pitch (radian)Yaw (radian)
Front bumper1.300.3000
Rear bumper-1.400.300pi

Roll bar center

-0.601.05000