Is it possible to tune 2 PID controllers ?
88 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Nuh Metehan
il 4 Apr 2014
Modificato: Raju Rambha
il 15 Nov 2018
I am trying to tune 2 PID controllers but I am not able to get a good results.
Firstly I tuned the first PID then second, If I tune the first one again I got completely different results.
Could anyone give me an idea ?
0 Commenti
Risposta accettata
Arkadiy Turevskiy
il 8 Apr 2014
Modificato: Arkadiy Turevskiy
il 8 Apr 2014
The traditional way to handle this problem is tune the inner loop first with the outer loop open, then tune the outer loop.
What that means practically is that you would delete the line from the Saturation 1 to second sum block, and tune Current Controller PID. Then connect the line back and tune Position Control PID.
The alternative method is to tune two controllers simultaneously.
0 Commenti
Più risposte (3)
Azzi Abdelmalek
il 4 Apr 2014
Since your system you want to control is not linear, the behavior of your PID is unpredictable, what you need to do is
Step1: adjust the first controller, then vary the parameters for the second controller,
step2: adjust again the first controller, and do the same for the second controller
And so on until you find acceptable performances
0 Commenti
Shery
il 10 Mag 2014
Modificato: Shery
il 10 Mag 2014
Can u guys advise me on the position control of the BLDC motor , i have to tune 3 pid controllers , one for position , one for speed and one for PWM which will vary the duty cycle. I am using the simpower. Can I use PID auto tunning first for inner loop, than for outer and so on.
0 Commenti
Raju Rambha
il 15 Nov 2018
Modificato: Raju Rambha
il 15 Nov 2018
You can get the position control example from mathworks in R2018b. where there is a compleate simulink structure for BLDC motor. If yours a latest version (R2018b) try it in command window as "pe_bldc_position_control"
0 Commenti
Vedere anche
Categorie
Scopri di più su PID Controller Tuning in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!