Is this possible to convert a thick line or curve into its thinner version
7 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Is this possible to convert a thick line or curve into its thinner version in an image using Matlab / Octave? Please view the image. Right side curves (alphabets) are thicker and need to be converted into the left ones. i.e., a single line version is needed.
thanks
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/146145/image.jpeg)
0 Commenti
Risposta accettata
Ahmet Cecen
il 18 Nov 2014
Take an image with the best exposure possible, having high contrast between the paper white and font black. Use a simple tresholding method like Otsu's and get a BW binary image. Use:
a) erosion (imerode) with a disk structural element (strel)
or
b) use bwulterode
or
c) you can also use bwmorph with 'skel' option.
I am sure there are other ways to do it too. Just a couple simple ones that might help start.
3 Commenti
Ahmet Cecen
il 20 Nov 2014
What's happening there is you are eroding on the white instead of black. You need to invert the image using:
BW=1-BW;
so that the pixels where the letters are have 1's on them (which means your image should have white letters and black background). Now try them again. I think Image Analyst is right the first 2 options would only work in very specific conditions, but give them a try anyways its good learning experience.
Image Analyst
il 20 Nov 2014
Then why did you accept it. If you had used my answer, it would have worked.
Più risposte (2)
Image Analyst
il 18 Nov 2014
You can skeletonize it after thresholding.
binaryImage = grayImage < 128; % or whatever.
skeletonImage = bwmorph(binaryImage, 'skel', inf);
You cannot use imerode() because it will break apart your object into multiple objects. You cannot use bwulterode because it will shrink the blob down to a single point.
2 Commenti
Image Analyst
il 20 Nov 2014
Modificato: Image Analyst
il 20 Nov 2014
It did not work because you did not do what I recommended . Look at the line where I thresholded. It will take everything that is darker than 128 and turn it white. Why did you not do that? You should notice that I even specifically said NOT to use bwulterode() or imerode(). All I can figure is that this reply was really meant for Ahmet, not for me. I know you accepted his answer already, but if you need any more help, feel free to ask.
baby
il 24 Nov 2014
1 Commento
Image Analyst
il 24 Nov 2014
Again, this is not my code. You took the skeleton of a2, which is not the binary image. The binary image is the badly-named "a". So you're still not doing what I suggested - perhaps the poor variable names confused you, that's why I recommend using descriptive variable names like grayImage, binaryImage, skeletonImage, etc. Please attach your original B image that you used so I can try it.
Vedere anche
Categorie
Scopri di più su Computer Vision with Simulink in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!