This submission contains a wind farm model with 140 individual Type III DFIGs. The Type III DFIGs are integrated into the system using Model Reference and through a simple voltage transfer mechanism in Simulink. This example is used in the following webinar https://www.mathworks.com/videos/large-scale-wind-farm-modeling-and-simulation-in-matlab-and-simulink-81935.html.
Graham Dudgeon (2021). Large-Scale Wind Farm Modeling and Simulation in Simulink (https://www.mathworks.com/matlabcentral/fileexchange/68597-large-scale-wind-farm-modeling-and-simulation-in-simulink), MATLAB Central File Exchange. Retrieved .
Dear Dr. Graham Dudgeon
The model is not running. Can you please update the file?
This model gives permission for modifying and using it with restrictions as mentioned but as the model is being modified,
I am not able to run the model.
Can anyone share the steps how to run the model after modification?
The model needs correction.
It seems, something is wrong with the simulation. When the simulation is started, till 3 seconds it works pretty well. After a lot of inter-area oscillations are getting occurred.
Hence, i would request you to kindly may be reviewed this issue.
Find the treasures in MATLAB Central and discover how the community can help you!Start Hunting!