Risposto
Generate mex file for filter
Unfortunately, it doesn't look like you can generate code from this class. Perhaps you can separate out the call to the filter i...

oltre 13 anni fa | 0

| accettato

Risposto
Code generation of TCP/IP block
The TCP/IP block is probably not supported for code-generation, which is why you don't see it in the generated code (do you see ...

oltre 13 anni fa | 1

| accettato

Risposto
empty signal coming into minimum block problem
Not sure if this is what you're looking for, but you can use the <http://www.mathworks.com/help/simulink/slref/stopsimulation.ht...

oltre 13 anni fa | 0

Risposto
Insert a detector block in simulink
Try this instead: hDetector=add_block('sldvlib/Temporal Operators/Detector',[blockName 'Detector']) You can right click ...

oltre 13 anni fa | 0

| accettato

Risposto
Set ports properties from Level2-M-File
Yes, you do have to specify the output port sampling modes as well. Also, your |setInPortSamMode| doesn't have the correct proto...

oltre 13 anni fa | 0

Risposto
I need PLC code generator in simulink but does not aprear in my pop menu. how can I install it?
If you need to buy a license to Simulink PLC Coder, you can either call <http://www.mathworks.com/support/contact_us/index.html ...

oltre 13 anni fa | 0

Risposto
Error in MATLAB function
Your MATLAB Function block's <http://www.mathworks.com/help/simulink/ug/matlab-function-block-editor.html#bqgwvsq-1 Ports and Da...

oltre 13 anni fa | 0

Risposto
MATLAB command line control of Simulink signal builder
Please see this <http://www.mathworks.com/matlabcentral/answers/49996 previously answered question>.

oltre 13 anni fa | 0

Risposto
errors of HDL Coder geneation in tutorial
The "cmd.exe is not recognized as an internal or external command, operable program or batch file" error usually means that you ...

oltre 13 anni fa | 0

Risposto
Is there a tutorial for exporting a Simulink Model to C++ for running in an external real time simulation?
Here is the relevant documentation: <http://www.mathworks.com/help/rtw/hardware-in-the-loop-hil-simulation.html Deploy environme...

oltre 13 anni fa | 0

Risposto
Problem in Find Simulink Block
You can use a <http://www.mathworks.com/help/simulink/ug/triggered-subsystems.html Triggered Subsystem> to do this.

oltre 13 anni fa | 1

Risposto
open another software using MATLAB
If the software has a COM interface, you can use the <http://www.mathworks.com/help/matlab/using-com-objects-in-matlab.html MATL...

oltre 13 anni fa | 0

Risposto
simulink support for Arduino evaluation
You should be able to use blocks from the <http://www.mathworks.com/help/simulink/logic-and-bit-operations.html Logic and Bit Op...

oltre 13 anni fa | 0

Risposto
how to integrate matlab code with fpga kit
You can use <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder> to generate HDL code from your MATLAB functions. ...

oltre 13 anni fa | 0

Risposto
Simulink: How to start simulation of a subsystem separately?
If your subsystem is inside an <http://www.mathworks.com/help/simulink/ug/enabled-subsystems.html enabled subsystem>, you simply...

oltre 13 anni fa | 0

Risposto
CMEX S-function callback methods
You can use <http://www.mathworks.com/help/simulink/sfg/mdlsimstatuschange.html mdlSimStatusChange> (with the condition: |simSta...

oltre 13 anni fa | 0

| accettato

Risposto
Compiling C++ s-functions in MATLAB R2007b x86 on Windows 7 x64 Professional
The 'Specified module could not be found' error usually means that you are missing one or more DLL dependencies. Please see if t...

oltre 13 anni fa | 0

| accettato

Risposto
How to control no. of simulations/iterations of embedded MATLAB program in Simulink model
Please read the section <http://www.mathworks.com/help/simulink/ug/choosing-a-solver.html Choose a Solver> to understand the dif...

oltre 13 anni fa | 0

Risposto
Getting the datatype of a signal from simulink
Please see <http://www.mathworks.com/matlabcentral/answers/8679#answer_11953 this answer>.

oltre 13 anni fa | 2

Risposto
Communication between MATLAB R2010a and CCS 3.3
I think what you need is <http://www.mathworks.com/help/ecoder/ug/processor-in-the-loop-pil-simulation.html PIL Simulation>. You...

oltre 13 anni fa | 0

Risposto
Block Creation in Simulink
Please read the section on <http://www.mathworks.com/help/simulink/custom-block-basics.html Custom Block Basics> to get started....

oltre 13 anni fa | 0

Risposto
Compiled S-Function Not Found Error
What does MATLAB return when you type "mexext" at the prompt? If it returns mexa64, then you need to compile your MEX-function a...

oltre 13 anni fa | 0

Risposto
How to connect Phantom (Robot) to windows real-time target?
From <http://www.mathworks.com/help/rtwin/ug/using-i-o-boards.html this page>: "The device drivers supported by the Real-Time...

oltre 13 anni fa | 1

| accettato

Risposto
MATLAB compiling problem/error
I'm not sure if I can be of much help, but just some thoughts that might help you understand what might be going on: # It is ...

oltre 13 anni fa | 0

Risposto
create Executable file from simulink model
I think you might need to modify the generated code to accept the input from whatever source you need it to use.

oltre 13 anni fa | 1

Risposto
how to define x-vectorm in M S-Function
You are required to return your computed states (the vector x) in Case 2 (mdlUpdate). Please read <http://www.mathworks.com/help...

oltre 13 anni fa | 0

Risposto
How can I access the value of signals at the time of stopping the simulation.
Perhaps you can use the model callback <http://www.mathworks.com/help/simulink/ug/using-callback-functions.html#f4-56417 StopFcn...

oltre 13 anni fa | 0

Risposto
Generate a variable sine wave during simulink simulation
The Sine Wave block from the Simulink>Sources library does not accept any inputs, so you cannot use this block to change 'M' and...

oltre 13 anni fa | 0

| accettato

Risposto
can i install Matlab runtime (MCR) on android tab?
The MATLAB Compiler Runtime (MCR) has the same System requirements as MATLAB. See <http://www.mathworks.com/support/sysreq/previ...

oltre 13 anni fa | 0

| accettato

Risposto
is Simulink can contact with FPGA kit ?
Yes, you can generate HDL code from Simulink models using <http://www.mathworks.com/products/hdl-coder/index.html HDL Coder>. Pl...

oltre 13 anni fa | 0

| accettato

Carica altro