Answered

How to capture real time data using Tektronix oscilloscope?

There is a <https://www.mathworks.com/help/instrument/using-quick-control-oscilloscope.html#bs8vvdm good example in the document...

How to capture real time data using Tektronix oscilloscope?

There is a <https://www.mathworks.com/help/instrument/using-quick-control-oscilloscope.html#bs8vvdm good example in the document...

oltre 2 anni ago | 0

Answered

CC2541 and MATLAB Connection

I'm no familiar with this device. Does it support a Bluetooth Serial Port Profile (SPP)? If so, you should be able to connect to...

CC2541 and MATLAB Connection

I'm no familiar with this device. Does it support a Bluetooth Serial Port Profile (SPP)? If so, you should be able to connect to...

oltre 2 anni ago | 0

Answered

Creating a standalone executable with Vehicle Network Toolbox commands

This should be possible to do. Please contact <http://www.mathworks.com/support/contact_us technical support> .

Creating a standalone executable with Vehicle Network Toolbox commands

This should be possible to do. Please contact <http://www.mathworks.com/support/contact_us technical support> .

oltre 2 anni ago | 0

Answered

Is it possible to connect to a UDP multicast using the Instrument Control Toolbox 2.2 (R14SP2)?

If you are using MATLAB R2016b or newer, take a look at this example: http://www.mathworks.com/matlabcentral/fileexchange/59156 ...

Is it possible to connect to a UDP multicast using the Instrument Control Toolbox 2.2 (R14SP2)?

If you are using MATLAB R2016b or newer, take a look at this example: http://www.mathworks.com/matlabcentral/fileexchange/59156 ...

oltre 2 anni ago | 0

Answered

Does Matlab support UDP Multicast?

Take a look at this example: http://www.mathworks.com/matlabcentral/fileexchange/59156 Technically it is UDP broadcast, but i...

Does Matlab support UDP Multicast?

Take a look at this example: http://www.mathworks.com/matlabcentral/fileexchange/59156 Technically it is UDP broadcast, but i...

oltre 2 anni ago | 0

Submitted

UDP broadcasting from MATLAB

An example of broadcasting UDP messages from MATLAB to multiple Arduinos on the same subnet.

oltre 2 anni ago | 11 downloads |

Answered

Tmtool don't recognize the tcp/ip on a computer, but does it on another one

It appears that MATLAB is unable to find your VISA implementation. This could be because you have 64-bit MATLAB and 32-bit VISA....

Tmtool don't recognize the tcp/ip on a computer, but does it on another one

It appears that MATLAB is unable to find your VISA implementation. This could be because you have 64-bit MATLAB and 32-bit VISA....

oltre 2 anni ago | 0

Answered

Matlab Serial RS232 connection with a null modem not working

Depending on your hardware requirements, you may need to unassert the RTS and DTR pins during the opening of the serial object. ...

Matlab Serial RS232 connection with a null modem not working

Depending on your hardware requirements, you may need to unassert the RTS and DTR pins during the opening of the serial object. ...

oltre 2 anni ago | 0

Answered

Uploading a file with webwrite

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

Uploading a file with webwrite

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

oltre 2 anni ago | 0

Answered

Problem using webwrite to send image through a simple REST API

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

Problem using webwrite to send image through a simple REST API

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

oltre 2 anni ago | 0

Answered

Upload files to webservers using Matlab's webread/webwrite or urlread2, urlreadpost

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

Upload files to webservers using Matlab's webread/webwrite or urlread2, urlreadpost

Here's an example that uploads any file from MATLAB to DropBox programmatically: http://www.mathworks.com/matlabcentral/filee...

oltre 2 anni ago | 0

Answered

Tmtool don't recognize the tcp/ip on a computer, but does it on another one

Since TMTOOL works on your laptop but not on your desktop, I suspect your desktop configuration has an issue. Have you added the...

Tmtool don't recognize the tcp/ip on a computer, but does it on another one

Since TMTOOL works on your laptop but not on your desktop, I suspect your desktop configuration has an issue. Have you added the...

oltre 2 anni ago | 0

Answered

Instrument control hangs on tekvisa search

I would generally recommend Keysight (Agilent) VISA or National Instruments VISA. In my experience these are far more mature imp...

Instrument control hangs on tekvisa search

I would generally recommend Keysight (Agilent) VISA or National Instruments VISA. In my experience these are far more mature imp...

oltre 2 anni ago | 0

Answered

Extract signal info from a CAN log

This should prove to be a <http://www.mathworks.com/help/matlab/matlab_prog/access-data-in-nested-structures.html useful resourc...

Extract signal info from a CAN log

This should prove to be a <http://www.mathworks.com/help/matlab/matlab_prog/access-data-in-nested-structures.html useful resourc...

oltre 2 anni ago | 0

Answered

I would like an example of scpi over ethernet to Rigol Instruments using the instrument control toolbox.

I've not tested this as I don't have a Rigol scope, but you should be able to start from here: # Initialize scope. The port...

I would like an example of scpi over ethernet to Rigol Instruments using the instrument control toolbox.

I've not tested this as I don't have a Rigol scope, but you should be able to start from here: # Initialize scope. The port...

oltre 2 anni ago | 1

Answered

How can I use serial() without using an InstrumentControlToolbox license?

Just using the SERIAL functionality should not check out a license for Instrument Control Toolbox. Are you sure none of your oth...

How can I use serial() without using an InstrumentControlToolbox license?

Just using the SERIAL functionality should not check out a license for Instrument Control Toolbox. Are you sure none of your oth...

oltre 2 anni ago | 1

| accepted

Submitted

Measure radio frequency power using MATLAB and an RF power meter

MATLAB example to make RF Power measurements using an Agilent RF Power Meter

oltre 2 anni ago | 3 downloads |

Submitted

Capturing a waveform from an Agilent oscilloscope over a standard VISA interface

MATLAB example to capture a waveform from an Agilent oscilloscope and grab a screenshot.

oltre 2 anni ago | 40 downloads |

Submitted

Generating Waveforms on Agilent MXG, ESG, PSG Signal Sources using MATLAB

MATLAB® example to download arbitrary waveform data on Agilent MXG, ESG, or PSG signal sources.

oltre 2 anni ago | 19 downloads |

Submitted

Model-Based Design of a SUV Anti-Rollover Control System

Models and literature demonstrating Model Based Design of a SUV Anti-Rollover Control System.

oltre 2 anni ago | 3 downloads |

Submitted

Agilent Infiniium and InfiniiVision Oscilloscopes – MATLAB Example

MATLAB application example for Agilent Infiniium and InfiniiVision oscilloscopes

oltre 2 anni ago | 55 downloads |

Answered

Matlab instrumental control through USB

Did you look at the example here: http://www.mathworks.com/help/instrument/using-quick-control-function-generator.html Mak...

Matlab instrumental control through USB

Did you look at the example here: http://www.mathworks.com/help/instrument/using-quick-control-function-generator.html Mak...

oltre 2 anni ago | 0

Answered

Matlab compiler and instrument toolbox

I'm not aware of any bugs that can cause this behavior. Could you create a <www.mathworks.com/support/contact_us technical suppo...

Matlab compiler and instrument toolbox

I'm not aware of any bugs that can cause this behavior. Could you create a <www.mathworks.com/support/contact_us technical suppo...

oltre 2 anni ago | 0

Answered

How do I check if an instrument's output is on or off?

That's a question for Keithley tech support. My reading of the <http://research.physics.illinois.edu/bezryadin/labprotocol/Keith...

How do I check if an instrument's output is on or off?

That's a question for Keithley tech support. My reading of the <http://research.physics.illinois.edu/bezryadin/labprotocol/Keith...

oltre 2 anni ago | 0

| accepted

Answered

Will Instrument Control Toolbox support my PicoScope 3204D under Mac OS X?

The picoscope driver is authored by picotech - the device manufacturers. You can contact the picotech technical support for ques...

Will Instrument Control Toolbox support my PicoScope 3204D under Mac OS X?

The picoscope driver is authored by picotech - the device manufacturers. You can contact the picotech technical support for ques...

oltre 2 anni ago | 0

Answered

How do I create and use a MATLAB Instrument Driver (.mdd) file for use with SEGGER J-Link Pro interface?

It doesn't appear that the device in question has an IVI or VXIPnP driver. In this case, you will want to open up MIDEDIT and cr...

How do I create and use a MATLAB Instrument Driver (.mdd) file for use with SEGGER J-Link Pro interface?

It doesn't appear that the device in question has an IVI or VXIPnP driver. In this case, you will want to open up MIDEDIT and cr...

oltre 2 anni ago | 0

Answered

How do I plot live data acquired via a NIDAQ inside a GUI window?

Here's a good example: http://www.mathworks.com/help/daq/examples/software-analog-triggered-data-capture.html

How do I plot live data acquired via a NIDAQ inside a GUI window?

Here's a good example: http://www.mathworks.com/help/daq/examples/software-analog-triggered-data-capture.html

circa 3 anni ago | 0

| accepted

Answered

Problem with updating CAN Pack/Upack blocks programmatically

Saeed, please contact <www.mathworks.com/support/contact_us MathWorks Technical Support> .

Problem with updating CAN Pack/Upack blocks programmatically

Saeed, please contact <www.mathworks.com/support/contact_us MathWorks Technical Support> .

circa 3 anni ago | 0

Answered

How can I increase the speed of my stepper motor?

Rather than using outputSingleScan, can you queue up data and send the data using startForeground at a specific rate so the moto...

How can I increase the speed of my stepper motor?

Rather than using outputSingleScan, can you queue up data and send the data using startForeground at a specific rate so the moto...

circa 3 anni ago | 0