Installazione e configurazione
Prima di poter iniziare a utilizzare Communications Toolbox™ Support Package for Analog Devices® ADALM-Pluto Radio, è necessario:
Installare questo pacchetto di supporto seguendo le istruzioni riportate in Install Support Package for Analog Devices ADALM-PLUTO Radio.
Stabilire la comunicazione tra il computer host e la radio seguendo i passaggi descritti in Configurazione guidata dell'hardware host-radio.
Funzioni
configurePlutoRadio | Configure ADALM-PLUTO radio firmware |
findPlutoRadio | Report information about attached radios |
sdrdev | Create radio object for specific radio hardware |
Classi
comm.SDRDevPluto | Create object for Analog Devices ADALM-PLUTO radio |
Argomenti
- Supported Hardware and Required Software
Get an overview of supported hardware and required software products.
- Install Support Package for Analog Devices ADALM-PLUTO Radio
Install the Communications Toolbox Support Package for Analog Devices ADALM-Pluto Radio.
- Guided Host-Radio Hardware Setup
Follow an automated hardware setup process to establish communication between the host and the radio hardware.
- Manual Host-Radio Hardware Setup
Follow a manual hardware setup process to establish communication between the host and the radio hardware.
- What to Do After Installation
After you have successfully installed the support package, you can do any of the following:
- Setup for Two Radios Connecting to One Host
Set up two radio hardware devices connected to one host computer.
- Uninstall Support Packages
Uninstall the support package using the Add-Ons panel.
Risoluzione dei problemi
Resolve issues encountered while installing or using the features of the support package.
