Radio I/O
Transmit and receive real-world RF signals
When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single channel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.
Funzioni
sdrrx | Create receiver System object for radio hardware |
sdrtx | Create transmitter System object for radio hardware |
capture | Capture RF signal data using SDR device (Da R2019b) |
designCustomFilter | Design custom filter for Analog Devices AD936x RF chip |
info | Obtain radio information |
transmitRepeat | Download waveform to radio and repeatedly transmit it over the air |
Blocchi
Pluto Receiver | Receive data from Analog Devices ADALM-PLUTO radio |
Pluto Transmitter | Transmit data to Analog Devices ADALM-PLUTO radio |
Oggetti
comm.SDRRxPluto | Receive data from Analog Devices ADALM-PLUTO radio |
comm.SDRTxPluto | Transmit data to Analog Devices ADALM-PLUTO radio |
Argomenti
- Channel I/O
Use ADALM-PLUTO radio channels to send and receive data.
- Repeated Waveform Transmitter
Use a transmitter System object™ for repeated signal transmission.
- Detect Underruns and Overruns
To detect underruns and overruns, use the lost sample indicator.
- Burst Mode
To achieve real time performance, enable burst mode.
Risoluzione dei problemi
Resolve issues encountered while installing or using the features of the support package.