Before you use the function generator channels, see Data Acquisition Toolbox Supported Hardware and Hardware Discovery and Setup.
Generate a Standard Waveform Using Function Waveform Generator Channels
Generate a sine function on a Digilent device waveform generator channel.
Digilent Function Waveform Generator Channels
Function waveform generator channels on a Digilent device can generate standard and arbitrary function waveforms.
Supported waveform types and their programmable properties.
Digilent Analog Discovery Devices
Generate analog output voltage data (at a rate of 300kHz). The output voltage-range of the outgoing signal is -5.0 to +5.0 volts. You will use the session-based interface with Digilent Analog Discovery hardware.
Synchronously generate and acquire voltage data at a rate of 300 kHz.
Use function generator channels to generate a 1 kHz sinusoidal waveform, and record data at the same time, using an analog input channel.
Use function generator channels to generate an arbitrary 1kHz waveform function, and record data at the same time, using an analog input channel.
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window.
Web browsers do not support MATLAB commands.
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Contact your local office
Get trial now