displayCaptureCondition

Display overall capture condition

Since R2022a

collapse all in page

Syntax

displayCaptureCondition(DC)

Description

displayCaptureCondition(DC) displays the signal value comparisons and logical operator that define the overall capture condition. DC is a customized data capture object.

example

Examples

collapse all

This example uses a customized data capture object, DC, that defines two signals for both trigger and data capture. Signal A is 1 bit and signal B is 8 bits.

Enable capture condition logic.

DC.EnableCaptureCtrl = true;

To enable capture condition logic, you must select the Include capture condition logic parameter while generating the data capture IP core using the FPGA Data Capture Component Generator tool.

Set up a capture condition to capture data when the FPGA detects a high value on signal A at the same time as signal B is greater than 7.

setCaptureCondition(DC,'A',true,'High');
setCaptureCondition(DC,'B',true,7);
setCaptureConditionComparisonOperator(DC,'B','>');

Combine comparisons of signals A and B into an overall capture condition using an AND operator.

setCaptureConditionCombinationOperator(DC,'AND');

Display the overall capture condition.

displayCaptureCondition(DC);
The capture condition is:
A==High and B>7

Input Arguments

collapse all

Customized data capture object, specified as an hdlverifier.FPGADataReader System object.

Version History

Introduced in R2022a

See Also

Objects

Tools