## 2-D Geometry Creation in PDE Modeler App

### Create Basic Shapes

The PDE Modeler app lets you draw four basic shapes: a circle, an ellipse, a
rectangle, and a polygon. To draw a basic shape, use the **Draw**
menu or one of the following buttons on the toolbar. To cut, clear, copy, and paste the
solid objects, use the **Edit** menu.

Draw a rectangle/square starting at a corner. Using
the left mouse button, drag to create a rectangle. Using the right
mouse button (or | |

Draw a rectangle/square starting at the center. Using the left mouse button, drag to create a
rectangle. Using the right mouse button (or
| |

Draw an ellipse/circle starting at the perimeter. Using the left mouse button, drag to create an ellipse.
Using the right mouse button (or | |

Draw an ellipse/circle starting at the center. Using the left mouse button, drag to create an ellipse.
Using the right mouse button (or | |

Draw a polygon. Using the left mouse button, drag to create polygon edges. You can close the polygon by pressing the right mouse button. Clicking at the starting vertex also closes the polygon. |

Alternatively, you can create a basic shape by typing one of the following commands in
the MATLAB^{®} Command Window:

These commands open the PDE Modeler app with the requested shape already drawn in it. If the app is already open, these commands add the requested shape to the app window without deleting any existing shapes.

You can use a sequence of drawing commands to create several basic shapes. For example, these commands create a circle, a rectangle, an ellipse, and a polygon:

pderect([-1.5,0,-1,0]) pdecirc(0,0,1) pdepoly([-1,0,0,1,1,-1],[0,0,1,1,-1,-1]) pdeellip(0,0,1,0.3,pi)

### Select Several Shapes

To select a single shape, click it using the left mouse button.

To select several shapes and to deselect shapes, use

**Shift**+click (or click using the middle mouse button). Clicking outside of all shapes, deselects all shapes.To select all the intersecting shapes, click the intersection of these shapes.

To select all shapes, use the

**Select All**option from the**Edit**menu.

### Rotate Shapes

To rotate a shape:

Select the shapes.

Select

**Rotate**from the**Draw**menu.In the resulting

**Rotate**dialog box, enter the rotation angle in degrees. To rotate counterclockwise, use positive values of rotation angles. To rotate clockwise, use negative values.By default, the rotation center is the center-of-mass of the selected shapes. To use a different rotation center, clear the

**Use center-of-mass**option and enter a rotation center (*x*c,*y*c) as a 1-by-2 vector, for example,`[-0.4 0.3]`

.

### Create Complex Geometries

You can specify complex geometries by overlapping basic shapes. This approach is called Constructive Solid Geometry (CSG). The PDE Modeler app lets you combine basic shapes by using their unique names.

The app assigns a unique name to each shape. The names depend on the type of the shape:

For circles, the default names are

`C1`

,`C2`

,`C3`

, and so on.For ellipses, the default names are

`E1`

,`E2`

,`E3`

, and so on.For polygons, the default names are

`P1`

,`P2`

,`P3`

, and so on.For rectangles, the default names are

`R1`

,`R2`

,`R3`

, and so on.For squares, the default names are

`SQ1`

,`SQ2`

,`SQ3`

, and so on.

To change the name and parameters of a shape, first switch to the draw mode and then
double-click the shape. (Select **Draw Mode** from the
**Draw** menu to switch to the draw mode.) The resulting
dialog box lets you change the name and parameters of the selected shape. The name
cannot contain spaces.

Now you can combine basic shapes to create a complex geometry. To do this, use the
**Set formula** field located under the toolbar. Here you can
specify a geometry by using the names of basic shapes and the following
operators:

`+`

is the set union operator.For example,

`SQ1+C2`

creates a geometry comprised of all points of the square`SQ1`

and all points of the circle`C2`

.`*`

is the set intersection operator.For example,

`SQ1*C2`

creates a geometry comprised of the points that belong to both the square`SQ1`

and the circle`C2`

.`-`

is the set difference operator.For example,

`SQ1-C2`

creates a geometry comprised of the points of the square`SQ1`

that do not belong to the circle`C2`

.

The operators `+`

and `*`

have the same precedence.
The operator `-`

has a higher precedence. You can control the
precedence by using parentheses. The resulting geometrical model (called
*decomposed geometry*) is the set of points for which the set
formula evaluates to true. By default, it is the union of all basic shapes.

### Adjust Axes Limits and Grid

To adjust axes limits:

Select

**Axes Limits**from the**Options**menuSpecify the range of the

*x*-axis and the*y*-axis as a 1-by-2 vector such as`[-10 10]`

. If you select**Auto**, the app uses automatic scaling for the corresponding axis.Apply the specified axes ranges by clicking

**Apply**.Close the dialog box by clicking

**Close**.

To add axis grid, the snap-to-grid feature, and zoom, use the
**Options** menu. To adjust the grid spacing:

Select

**Grid Spacing**from the**Options**menu.By default, the app uses automatic linear grid spacing. To enable editing the fields for linear spacing and extra ticks, clear

**Auto**.Specify the grid spacing for the

*x*-axis and*y*-axis. For example, change the default linear spacing`-1.5:0.5:1.5`

to`-1:0.2:1`

.You also can add extra ticks to customize the grid and aid in drawing. To separate extra tick entries, use spaces, commas, semicolons, or brackets.

Apply the specified grid spacing by clicking

**Apply**.Close the dialog box by clicking

**Done**.

### Create Geometry with Rounded Corners

Open the PDE Modeler app by using the

`pdeModeler`

command.Display grid lines by selecting

**Options**>**Grid**.Align new shapes to the grid lines by selecting

**Options**>**Snap**.Set the grid spacing for

*x*-axis to`-1.5:0.1:1.5`

and for*y*-axis to`-1:0.1:1`

. To do this, select**Options**>**Grid Spacing**, clear the**Auto**checkboxes, and set the corresponding ranges.Draw a rectangle with the width 2, the height 1, and the top left corner at (–1,0.5). To do this, first click the button. Then click the point (–1,0.5) and drag to draw a rectangle.

To edit the parameters of the rectangle, double-click it. In the resulting dialog box, specify the exact parameters.

Draw four circles with the radius 0.2 and the centers at (–0.8,–0.3), (–0.8,0.3), (0.8,–0.3), and (0.8,0.3).To do this, first click the button. Then click the center of a circle using the right mouse button and drag to draw a circle. The right mouse button constrains the shape you draw to be a circle rather than an ellipse. If the circle is not a perfect unit circle, then double-click it. In the resulting dialog box, specify the exact center location and radius of the circle.

Add four squares with the side 0.2, one in each corner.

Model the geometry with rounded corners by subtracting the small squares from the rectangle, and then adding the circles. To do this, enter the following formula in the

**Set formula**field.R1-(SQ1+SQ2+SQ3+SQ4)+C1+C2+C3+C4

Switch to the boundary mode by clicking the button or selecting

**Boundary**>**Boundary Mode**. The CSG model is now decomposed using the set formula, and you get a rectangle with rounded corners.Because of the intersection of the solid objects used in the initial CSG model, a number of subdomain borders remain. They appear as gray lines. To remove these borders, select

**Boundary**>**Remove All Subdomain Borders**.