# phitheta2azel

Convert angles from phi/theta form to azimuth/elevation form

## Description

converts
the phi/theta
angle pairs to their corresponding azimuth/elevation angle pairs.`AzEl`

= phitheta2azel(`PhiTheta`

)

## Examples

### Convert Phi-Theta Coordinates to Azimuth-Elevation Coordinates

Find the azimuth-elevation representation for φ = 30° and θ = 0°. Use the phi-theta convention with φ defined from the *y*-axis to the *z*-axis, and θ defined from the *x*-axis toward the *yz*-plane.

azel = phitheta2azel([30;10])

`azel = `*2×1*
8.6822
4.9809

### Rotate and Convert Phi-Theta Coordinates to Azimuth-Elevation Coordinates

Find the azimuth-elevation representation for φ = 30° and θ = 0°. Use the phi-theta convention with φ defined from the x-axis to the y-axis, and θ defined from the z-axis toward the xy-plane.

azel = phitheta2azel([30;10],false)

`azel = `*2×1*
30
80

*Copyright 2012 The MathWorks, Inc..*

## Input Arguments

`PhiTheta`

— Phi-theta angle pairs

two-row matrix

Phi and theta angles, specified as a two-row matrix. Each column of the matrix represents an angle in degrees, in the form [phi; theta].

**Data Types: **`double`

`RotAx`

— Phi-theta angle convention selection

`true`

(default) | `false`

Phi-theta angle convention selection, specified as `true`

or `false`

.

If

`RotAx`

is`true`

, the phi angle of a direction vector is the angle from the*z*-axis to the projection of the vector into the*yz*-plane. The theta angle is defined from the*x*-axis to the direction vector. Positive values are toward the*yz*-plane.If

`RotAx`

is`false`

, the phi angle is defined from the*x*-axis to the projection of the direction vector in the*xy*-plane. The angle is positive in the direction of the*y*-axis. The theta angle is defined from the*z*-axis to the direction vector and is positive in the direction of the*xy*- plane (see Alternative Definition of Phi and Theta Angles ).

**Data Types: **`logical`

## Output Arguments

`AzEl`

— Azimuth-elevation angle pairs

two-row matrix

Azimuth and elevation angles, returned as a two-row matrix. Each column of
the matrix represents an angle in degrees, in the form [azimuth; elevation].
The matrix dimensions of `AzEl`

are the same as those of
`PhiTheta`

.

## More About

### Azimuth and Elevation Angles

The *azimuth angle* of a vector is the angle between
the *x*-axis and the orthogonal projection of the vector onto the
*xy* plane. The angle is positive in going from the
*x* axis toward the *y* axis. Azimuth angles lie
between –180 and 180 degrees. The *elevation angle* is the angle
between the vector and its orthogonal projection onto the *xy*-plane. The
angle is positive when going toward the positive *z*-axis from the
*xy* plane. By default, the boresight direction of an element or array
is aligned with the positive *x*-axis. The boresight direction is the
direction of the main lobe of an element or array.

**Note**

The elevation angle is sometimes defined in the literature as the angle a vector makes
with the positive *z*-axis. The MATLAB^{®} and Phased Array System Toolbox™ products do not use this definition.

This figure illustrates the azimuth angle and elevation angle for a vector shown as a green solid line.

### Phi and Theta Angles

The phi angle (*φ*) is the angle from the positive
*y*-axis to the vector’s orthogonal projection onto the
*yz* plane. The angle is positive toward the positive
*z*-axis. The phi angle is between 0 and 360 degrees. The theta angle
(*θ*) is the angle from the *x*-axis to the vector
itself. The angle is positive toward the *yz* plane. The theta angle is
between 0 and 180 degrees.

The figure illustrates phi and theta for a vector that appears as a green solid line.

The coordinate transformations between φ/θ and *az/el* are described by
the following equations

$$\begin{array}{l}\mathrm{sin}el=\mathrm{sin}\varphi \mathrm{sin}\theta \\ \mathrm{tan}az=\mathrm{cos}\varphi \mathrm{tan}\theta \\ \mathrm{cos}\theta =\mathrm{cos}el\mathrm{cos}az\\ \mathrm{tan}\varphi =\mathrm{tan}el/\mathrm{sin}az\end{array}$$

### Alternative Definition of Phi and Theta Angles

The phi angle (*φ*) is the angle from the positive
*x*-axis to the vector’s orthogonal projection onto the
*xy* plane. The angle is positive toward the positive
*y*-axis. The phi angle is between 0 and 360 degrees. The theta angle
(*θ*) is the angle from the *z*-axis to the vector
itself. The angle is positive toward the *xy* plane. The theta angle is
between 0 and 180 degrees.

The figure illustrates *φ* and *θ* for a vector that appears as a green solid line.

$$\begin{array}{l}\varphi =az\\ \theta =90-el\\ az=\varphi \\ el=90-\theta \end{array}$$

This transformation applies when `RotAx`

is
`false`

.

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

Usage notes and limitations:

Does not support variable-size inputs.

## Version History

**Introduced in R2012a**

## Comando MATLAB

Hai fatto clic su un collegamento che corrisponde a questo comando MATLAB:

Esegui il comando inserendolo nella finestra di comando MATLAB. I browser web non supportano i comandi MATLAB.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)