# Backscatter Pedestrian

Backscatter signals from pedestrian

**Library:**Radar Toolbox

## Description

The Backscatter Pedestrian block models the monostatic reflection of non-polarized electromagnetic signals from a walking pedestrian. The pedestrian walking model coordinates the motion of 16 body segments to simulate natural motion. The model also simulates the radar reflectivity of each body segment. From this model, you can obtain the position and velocity of each segment and the total backscattered radiation as the body moves.

## Ports

### Input

`X`

— Incident radar signals

complex-valued *M*-by-16 matrix

Incident radar signals on each body segment, specified as a complex-valued
*M*-by-16 matrix. *M* is the number of samples in
the signal. See Body Segment Indices for the column
representing the incident signal at each body segment.

The size of the first dimension of the input matrix can vary to simulate a changing signal length. A size change can occur, for example, in the case of a pulse waveform with variable pulse repetition frequency.

**Data Types: **`double`

**Complex Number Support: **Yes

`Ang`

— Incident signal directions

real-valued 2-by-16 matrix

Incident signal directions on the body segments, specified as a real-valued
2-by-16 matrix. Each column of `ANG`

specifies the incident
direction of the signal to the corresponding body part. Each column takes the form of
an `[AzimuthAngle;ElevationAngle]`

pair. Units are in degrees. See
Body Segment Indices for the column
representing the incident direction at each body segment.

**Data Types: **`double`

`AngH`

— Pedestrian heading

scalar

Heading of the pedestrian, specified as a scalar. Heading is measured in the
*xy*-plane from the *x*-axis towards the
*y*-axis. Units are in degrees.

**Example: **`-34`

**Data Types: **`double`

### Output

`Y`

— Combined reflected radar signals

complex-valued *M*-by-1 column vector

Combined reflected radar signals, returned as a complex-valued
*M*-by-1 column vector. *M* equals the same number
of samples as in the input signal, `X`

.

**Data Types: **`double`

**Complex Number Support: **Yes

`Pos`

— Positions of body segments

real-valued 3-by-16 matrix

Positions of body segments, returned as a real-valued 3-by-16 matrix. Each column
represents the Cartesian position, `[x;y;z]`

, of one of 16 body
segments. Units are in meters. See Body Segment Indices for the column
representing the position of each body segment.

**Data Types: **`double`

`Vel`

— Velocity of body segments

real-valued 3-by-16 matrix

Velocity of body segments, returned as a real-valued 3-by-16 matrix. Each column
represents the Cartesian velocity, `[vx;vy;vz]`

, of one of 16 body
segments. Units are in meters per second. See Body Segment Indices for the column
representing the velocity of each body segment.

**Data Types: **`double`

`Ax`

— Orientation of body segments

real-valued 3-by-3-by-16 array

Orientation axes of body segments, returned as a real-valued 3-by-3-by-16 array. Each page represents the 3-by-3 orientation axes of one of 16 body segments. Units are dimensionless. See Body Segment Indices for the page representing the orientation of each body segment.

**Data Types: **`double`

## Parameters

`Height (m)`

— Height of pedestrian

`1.65`

(default) | positive scalar

Height of pedestrian, specified as a positive scalar. Units are in meters.

**Data Types: **`double`

`Walking Speed (m/s)`

— Walking speed of pedestrian

`1.4`

times pedestrian height (default) | nonnegative scalar

Walking speed of the pedestrian, specified as a nonnegative scalar. The motion model
limits the walking speed to 1.4 times the pedestrian height set in the **Height
(m)** parameter. Units are in meters per second.

**Data Types: **`double`

`Propagation speed (m/s)`

— Signal propagation speed

`physconst('LightSpeed')`

(default) | positive scalar

Signal propagation speed, specified as a real-valued positive scalar. The default
value of the speed of light is the value returned by
`physconst('LightSpeed')`

.

**Data Types: **`double`

`Operating Frequency (Hz)`

— Carrier frequency

`300e6`

(default) | positive scalar

Carrier frequency of narrowband incident signals, specified as a positive scalar. Units are in Hz.

**Example: **`1e9`

**Data Types: **`double`

`Initial Position (m)`

— Initial position of pedestrian

`[0;0;0]`

(default) | 3-by-1 real-valued vector

Initial position of the pedestrian, specified as a 3-by-1 real-valued vector in the
form of `[x;y;z]`

. Units are in meters.

**Data Types: **`double`

`Initial Heading (deg)`

— Initial heading of pedestrian

`0`

(default) | scalar

Initial heading of the pedestrian, specified as a scalar. Heading is measured in the
*xy*-plane from the *x*-axis towards
*y*-axis. Units are in degrees.

**Data Types: **`double`

`Simulate using`

— Block simulation method

`Interpreted Execution`

(default) | `Code Generation`

Block simulation, specified as `Interpreted Execution`

or
`Code Generation`

. If you want your block to use the
MATLAB^{®} interpreter, choose `Interpreted Execution`

. If
you want your block to run as compiled code, choose ```
Code
Generation
```

. Compiled code requires time to compile but usually runs
faster.

Interpreted execution is useful when you are developing and tuning a model. The
block runs the underlying System object™ in MATLAB. You can change and execute your model quickly. When you are satisfied
with your results, you can then run the block using ```
Code
Generation
```

. Long simulations run faster than in interpreted execution.
You can run repeated executions without recompiling, but if you change any block
parameters, then the block automatically recompiles before execution.

This table shows how the **Simulate using** parameter affects the
overall simulation behavior.

When the Simulink^{®} model is in `Accelerator`

mode, the block mode specified
using **Simulate using** overrides the simulation mode.

**Acceleration Modes**

Block Simulation | Simulation Behavior | ||

`Normal` | `Accelerator` | `Rapid Accelerator` | |

`Interpreted Execution` | The block executes using the MATLAB interpreter. | The block executes using the MATLAB interpreter. | Creates a standalone executable from the model. |

`Code Generation` | The block is compiled. | All blocks in the model are compiled. |

For more information, see Choosing a Simulation Mode (Simulink).

## More About

### Body Segment Indices

Body segment indices define which columns in the
**X**, **Ang**, **BPPOS**, and
**BPVEL** ports contain the data for a specific body segment. Body
segment indices define which page in the **Ax** port contains the data for
a specific body segments. For example, column 3 of **X** contains sample
data for the left lower leg. Column 3 of **Ang** contains the arrival angle
of the signal at the left lower leg.

Body Segment | Index | |
---|---|---|

Left foot | 1 | |

Right foot | 2 | |

Left lower leg | 3 | |

Right lower leg | 4 | |

Left upper leg | 5 | |

Right upper leg | 6 | |

Left hip | 7 | |

Right hip | 8 | |

Left lower arm | 9 | |

Right lower arm | 10 | |

Left upper arm | 11 | |

Right upper arm | 12 | |

Left shoulder | 13 | |

Right shoulder | 14 | |

Head | 15 | |

Torso | 16 |

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using Simulink® Coder™.

## Version History

**Introduced in R2021a**

## Comando MATLAB

Hai fatto clic su un collegamento che corrisponde a questo comando MATLAB:

Esegui il comando inserendolo nella finestra di comando MATLAB. I browser web non supportano i comandi MATLAB.

# Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)