Simscape Faults Interface
Use the Simscape fault interface and fault functions to control faults
The Simscape faults interface is convenient for working with single blocks as well as arrays of elements where you can apply a fault. You can add and configure the faults for each block in your model from a unified location, and you can turn fault simulation off to return your model to simulating baseline results. The Simscape fault functions help to add and analyze model faults.
Funzioni
simscape.addFaultsToBlock | Add faults to blocks (Da R2023b) |
simscape.getFaultableElementsInBlock | Return faultable block subelements (Da R2023b) |
simscape.findFaultableBlocks | Find blocks that support fault modeling (Da R2023b) |
Argomenti
- Introduction to Simscape Faults
Using the fault interface, creating faults, and triggering faults.
- Blocks that Support Fault Modeling
Information on blocks that support faults.
- Analyze a DC Armature Winding Fault
Add faults to a model using the faults interface.