Specify the Initialization, Output, and Termination Behavior

The setupImpl and stepImpl methods hook the C/C++ functions to the System object™. See Write the Hardware-Specific C/C++ Code for more information on creating C/C++ device driver code. The initialization of a digital pin as output needs to be done only once at model initialization. Hence, the digitalIOSetup function is called in setupImpl. To update the logic state of the digital output pin, a call to writeDigitalPin is made from stepImpl method. Nothing needs to be done at termination. Follow these steps to update the initialization, output, and termination code sections of the DigitalWrite System object you created in Select a System Object Template.

In the MATLAB^® editor, open DigitalWrite.m class file.

Update the setupImpl method using the following code.

methods (Access=protected)
    function setupImpl(obj) %#ok<MANU>
        if isempty(coder.target)
            % Place simulation setup code here
        else
            % Call C-function implementing device initialization
            coder.cinclude('digitalio_arduino.h');
            coder.ceval('digitalIOSetup', 9, 1);
        end
    end
    ...
end

The coder.ceval function executes calls to the C wrapper functions in digitalio_arduino.h. The second and third arguments of coder.ceval are the Arduino^® hardware pin number and pin mode values, respectively.

Update the BuildInfo method using the following code.

methods (Static)
    ...
    function updateBuildInfo(buildInfo, context)
        if context.isCodeGenTarget('rtw')
            % Update buildInfo
            srcDir = fullfile(fileparts(mfilename('fullpath')),'src'); %#ok     
            includeDir = fullfile(fileparts(mfilename('fullpath')),'include');                 
            addIncludePaths(buildInfo,includeDir);
            % Use the following API's to add include files, sources and linker flags
            addSourceFiles(buildInfo,'digitalio_arduino.cpp', srcDir);
        end
    end
    ...
end

Update the stepImpl method with the following code.

methods(Access=protected)
    ...
    function stepImpl(obj,u) %#ok<INUSD>
        if isempty(coder.target)
            % Place simulation setup code here
        else
            % Call C-function implementing device output
            coder.ceval('writeDigitalPin', 9, u);
        end
    end
    ...
end

Update the releaseImpl method with the following code.

methods(Access=protected)
    ...
    function releaseImpl(obj) %#ok<MANU>
        if isempty(coder.target)
            % Place simulation termination code here
        else
            % Call C-function implementing device termination
            % No termination code for Arduino
        end
    end
    ...
end

In the next section, you will Test System Object on MATLAB Command Line.

Specify the Initialization, Output, and Termination Behavior

See Also