plot is showing blank
4 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Kundan Prasad
il 16 Dic 2021
Commentato: Kundan Prasad
il 21 Dic 2021
I am not able to generate the plot. It is showing empty.
Please help me to solve the same
Thank you
clear all
clc
%% calculation of alpha angle
for i=1:2
alpha(i)= (pi*22)/180;
gamma(i)=0;
beta(i)= atan(cos(alpha(i))*sin(gamma(i))./(1+sin(alpha(i))*sin(gamma(i))));
end
%% calculation of thickness
R=0.4;
t(1)= R.*cos(alpha(1))./cot(alpha(1)+ beta(1));
t(2)= R.*cos(alpha(2))./cot(alpha(2)+ beta(2));
%%
n_1=1.49;
theta_1= asin(n_1.*sin(alpha(1)))-alpha(1);
%%
T=0.2;
H_1=0.1;
t(3)= (H_1-t(1)*(tan(alpha(1))-cot(theta_1)))./(cot(theta_1)-tan(alpha(2)));
t(4)= (t(2)*(tan(alpha(2))-cot(theta_1))+ T*(tan(alpha(1))-tan(alpha(2)))-H_1)./(tan(alpha(1))-cot(theta_1));
%%
h(1)=(T-t(1)-t(4))*tan(alpha(1));
h(2)=(T-t(3)-t(2))*tan(alpha(2));
%%
n_2=1.49;
lamda_min=0.004;
lamda_max=0.007;
phase= h(1)*(n_1 -1)./(lamda_min)+ h(2)*(n_2-1)./(lamda_min);
%%
T(1)=0.1;
e1= (sin(pi*((1-(phase/2*pi))))/(pi*((1-(phase/2*pi)))))^2;
e2= (sin(pi*(t(1)/T))/(pi*(t(1)/T)))^2;
e3= (sin(pi*(t(2)/T))/(pi*(t(2)/T)))^2;
e4= (sin(pi*(t(3)/T))/(pi*(t(3)/T)))^2;
e5= (sin(pi*(t(4)/T))/(pi*(t(4)/T)))^2;
%%
% R(j)=linspace(0,0.4,101);
syms x b(x)
f=0.025;
R=0.4;
b(x) = int(R-sqrt(R.^2-x.^2),0, f);
c(x) =sqrt((1/f)*b(x));
x =linspace(0,0.025,100);
e6= exp(((-4*pi*c(x))/lamda_min).^8);
effic= e1*e2*e3*e4*e5*e6;
fplot(effic,[0 0.025]);
% fplot(effic,x);
% efficline(0, 'k')
% syms lamda
% pide=int(e1*e2*e3*e4*e5*e6, lamda_min,lamda_max);
% fpide= (1/(lamda_max-lamda_min))*pide;
2 Commenti
Alberto Cuadra Lara
il 16 Dic 2021
Modificato: Alberto Cuadra Lara
il 16 Dic 2021
Hello Kundan,
If you check effic, you will see that all the values are infinitive, and this is because e6 is also infinitive. You can do the verification by transforming the symbolic variable to double
double(effic)
double(e6)
This is the reason the plot is empty.
Best,
Alberto
Risposta accettata
Alberto Cuadra Lara
il 17 Dic 2021
Hello Kundan,
Some comments:
- H1, I could not find the value in the paper. See Ref 22. and verify the value.
- R_T is the parametric variable in case you want to reproduce Fig. 5.
- Check per steps the values of the variables and think if it make sense each value.
- Compare a case in which you have final results in order to check that this script works.
Best,
Alberto.
function nu_m_mean = matlab_answers_diffraction()
% Function that computes the final difracction efficiency from Yang 2017
% Initialization
t = zeros(1, 4);
% Constants
alpha = (pi*22)/180 * ones(1, 2);
gamma = zeros(1, 2);
beta = atan((cos(alpha) .* cos(gamma)) ./ (1 + sin(alpha) .* sin(gamma)));
n1 = 1.49; % refractive index of substrate material - top
n2 = 1.49; % refractive index of substrate material - bottom
T = 100; % [micrometer]
H1 = 100; % microstructure height of double layer HDEs
lambda_min = 0.4; % [micrometer]
lambda_max = 0.7; % [micrometer]
m = 1; % diffraction order
f = 1.4; % feed rate [micrometer/r]
N = 1000;
R_T_vector = linspace(50, 400, N); % tool radius [micrometer]
% Compute Mean diffraction efficiency (PIDE)
for i = length(R_T_vector):-1:1
R_T = R_T_vector(i);
nu_m_mean(i) = compute_PIDE;
end
% Plot
plot(R_T_vector, nu_m_mean);
% NESTED FUNCTION
function nu_m_mean = compute_PIDE
% Compute Mean diffraction efficiency (PIDE)
% Diffractive angle
theta = asin(n1 * sin(alpha(1))) - alpha(1);
% Distances
t([1, 3]) = compute_distances_1_3(R_T, alpha([1,2]), beta([1,2]));
t(2) = compute_distances_2(alpha, t(1), theta, H1);
t(4) = compute_distances_4(alpha, t(3), theta, H1, T);
% Effective microstructure heights
h1 = compute_heights(alpha(1), T, t(1), t(4));
h2 = compute_heights(alpha(2), T, t(2), t(3));
% Phase delay
phi = @(lambda) compute_phase(h1, h2, n1, n2, lambda);
% Diffraction efficiency with a shadowing effect
e0 = @(lambda) compute_c(m - phi(lambda)/(2*pi));
e1 = compute_c(t(1)/T);
e2 = compute_c(t(2)/T);
e3 = compute_c(t(3)/T);
e4 = compute_c(t(4)/T);
nu_s = @(lambda) e0(lambda) * e1 * e2 * e3 * e4;
% RMS of the elements
diamond_tool_profile = @(x) R_T - sqrt(R_T^2 - x.^2);
sigma = sqrt(1/f * integral(diamond_tool_profile, 0, f));
% Mean diffraction efficiency (PIDE)
tau = @(lambda) exp((-4*pi .* sigma ./ lambda).^2);
nu_m = @(lambda) nu_s(lambda) .* tau(lambda).^4;
nu_m_mean = 1/(lambda_max - lambda_min) * integral(nu_m, lambda_min, lambda_max);
end
end
% SUB-PASS FUNCTIONS
function value = compute_distances_1_3(R_T, alpha, beta)
% Compute distances 1 or 3 (same function)
value = (R_T * cos(alpha)) ./ cot(alpha + beta);
end
function value = compute_distances_2(alpha, t, theta, H)
% Compute distance 2
value = (H - t * (tan(alpha(1)) - cot(theta))) / (cot(theta) - tan(alpha(2)));
end
function value = compute_distances_4(alpha, t, theta, H, T)
% Compute distance 4
value = (T * (tan(alpha(1)) - tan(alpha(2))) + t * (tan(alpha(2)) - cot(theta)) - H) / (tan(alpha(1)) - cot(theta));
end
function value = compute_heights(alpha, T, t1, t2)
% Compute effective microstructure heights
value = (T - t1 - t2) * tan(alpha);
end
function value = compute_phase(h1, h2, n1, n2, lambda)
% Compute phase delay
value = h1./lambda .* (n1 - 1) + h2./lambda .* (n2 - 1);
end
function value = compute_c(x)
% Compute function c from argument x
value = (sin(pi * x) / (pi * x))^2;
end
Più risposte (2)
Cris LaPierre
il 16 Dic 2021
Your values are all Inf. Consider checking your equations.
%% calculation of alpha angle
for i=1:2
alpha(i)= (pi*22)/180;
gamma(i)=0;
beta(i)= atan(cos(alpha(i))*sin(gamma(i))./(1+sin(alpha(i))*sin(gamma(i))));
end
%% calculation of thickness
R=0.4;
t(1)= R.*cos(alpha(1))./cot(alpha(1)+ beta(1));
t(2)= R.*cos(alpha(2))./cot(alpha(2)+ beta(2));
%%
n_1=1.49;
theta_1= asin(n_1.*sin(alpha(1)))-alpha(1);
%%
T=0.2;
H_1=0.1;
t(3)= (H_1-t(1)*(tan(alpha(1))-cot(theta_1)))./(cot(theta_1)-tan(alpha(2)));
t(4)= (t(2)*(tan(alpha(2))-cot(theta_1))+ T*(tan(alpha(1))-tan(alpha(2)))-H_1)./(tan(alpha(1))-cot(theta_1));
%%
h(1)=(T-t(1)-t(4))*tan(alpha(1));
h(2)=(T-t(3)-t(2))*tan(alpha(2));
%%
n_2=1.49;
lamda_min=0.004;
lamda_max=0.007;
phase= h(1)*(n_1 -1)./(lamda_min)+ h(2)*(n_2-1)./(lamda_min);
%%
T(1)=0.1;
e1= (sin(pi*((1-(phase/2*pi))))/(pi*((1-(phase/2*pi)))))^2;
e2= (sin(pi*(t(1)/T))/(pi*(t(1)/T)))^2;
e3= (sin(pi*(t(2)/T))/(pi*(t(2)/T)))^2;
e4= (sin(pi*(t(3)/T))/(pi*(t(3)/T)))^2;
e5= (sin(pi*(t(4)/T))/(pi*(t(4)/T)))^2;
%%
syms x b(x)
f=0.025;
R=0.4;
b(x) = int(R-sqrt(R.^2-x.^2),0, f);
c(x) =sqrt((1/f)*b(x));
x =linspace(0,0.025,100);
e6= exp(((-4*pi*c(x))/lamda_min).^8);
effic= e1*e2*e3*e4*e5*e6;
% View resulting values
double(subs(effic))
2 Commenti
Alberto Cuadra Lara
il 16 Dic 2021
Hello again Kundan,
I have to go and couldn't find the exact error. Some comments:
- Check the value of the constants and units, all in micrometers?
- H1 is less than h1. This cannot be, see Fig. 4.
- Try to include all constants at the beginning of the script. It would be easier for you to evaluate different cases.
I have tried to solve it from scratch, hope this helps.
function nu_m = matlab_answers_diffraction()
% Function that computes the final difracction efficiency from Yang 2017
% Initialization
t = zeros(1, 4);
% Constants
alpha = (pi*22)/180 * ones(1, 2);
gamma = zeros(1, 2);
beta = atan((cos(alpha) .* cos(gamma)) ./ (1 + sin(alpha) .* sin(gamma)));
n1 = 1.49; % refractive index of substrate material - top
n2 = 1.49; % refractive index of substrate material - bottom
R_T = 10; % [micrometer]
T = 100; % [micrometer]
H1 = 50; % microstructure height of double layer HDEs
lambda_min = 0.004; % [micrometer]
lambda_max = 0.007; % [micrometer]
m = 1;
f = 0.5; % [micrometer/r]
% Diffractive angle
theta = asin(n1 * sin(alpha(1))) - alpha(1);
% Distances
t([1, 3]) = compute_distances_1_3(R_T, alpha([1,2]), beta([1,2]));
t(2) = compute_distances_2(alpha, t(1), theta, H1);
t(4) = compute_distances_4(alpha, t(3), theta, H1, T);
% Effective microstructure heights
h1 = compute_heights(alpha(1), T, t(1), t(4));
h2 = compute_heights(alpha(2), T, t(2), t(3));
% Phase delay
phi = compute_phase(h1, h2, n1, n2, lambda_min);
% Diffraction efficiency with a shadowing effect
e0 = compute_c(m - phi/(2*pi));
e1 = compute_c(t(1)/T);
e2 = compute_c(t(2)/T);
e3 = compute_c(t(3)/T);
e4 = compute_c(t(4)/T);
nu_s = e0 * e1 * e2 * e3 * e4;
% RMS of the elements
dummy_fun = @(x) R_T - sqrt(R_T^2 - x.^2);
sigma = sqrt(1/f * integral(dummy_fun, 0, f));
% Final diffraction efficiency
tau = exp((-4*pi * sigma / lambda_min)^2);
nu_m = nu_s * tau^4;
end
% SUB-PASS FUNCTIONS
function value = compute_distances_1_3(R_T, alpha, beta)
% Compute distances 1 or 3 (same function)
value = (R_T * cos(alpha)) ./ cot(alpha + beta);
end
function value = compute_distances_2(alpha, t, theta, H)
% Compute distance 2
value = (H - t * (tan(alpha(1)) - cot(theta))) / (cot(theta) - tan(alpha(2)));
end
function value = compute_distances_4(alpha, t, theta, H, T)
% Compute distance 4
value = (T * (tan(alpha(1)) - tan(alpha(2))) + t * (tan(alpha(2)) - cot(theta)) - H) / (tan(alpha(1)) - cot(theta));
end
function value = compute_heights(alpha, T, t1, t2)
% Compute effective microstructure heights
value = (T - t1 - t2) * tan(alpha);
end
function value = compute_phase(h1, h2, n1, n2, lambda)
% Compute phase delay
value = h1./lambda .* (n1 - 1) + h2./lambda .* (n2 - 1);
end
function value = compute_c(x)
% Compute function c from argument x
value = (sin(pi * (x)) / (pi * (x)))^2;
end
Vedere anche
Categorie
Scopri di più su Descriptive Statistics in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!