Info
Questa domanda è chiusa. Riaprila per modificarla o per rispondere.
Chosing correct frequency axes.
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Hi all, I want to have amplitude and phase reconstruction of the signal. My signal is having 40KHz bandwidth and starting frequency is 70Khz to 110 KHz. Suppose my signal is x.
nfft = length(x);
res = fft(x,nfft)/ nfft; % normalizing the fft
f = fs/2*linspace(0,1,nfft/2+1); % choosing correct frequency
res = res(1:nfft/2+1); % amplitude of fft
res2 = fft(res);
now i want to plot frequncy versus amplitude and frequency versus phase. figure, plot(f,abs(res2) where the amplitude shoud be lying from the 70KHz to 110 Khz and same in the Figure(f,angle(res2), the phase shoud be spreaded over 70kHz to 110Khz. So how to chose the correct frequency axes.
0 Commenti
Risposte (0)
Questa domanda è chiusa.
Vedere anche
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!