the given transfer function is an improper transfer function
71 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
i want to implement this transfer function in simulink: 0.05252s (it has only numerator) and i get this error: "the given transfer function is an improper transfer function. The order of the transfer function numerator mus be less than or equal to the order of the denominator" how can i implement this transfer function in simulink? (in matlab is possible, it is a pd regulator)
0 Commenti
Risposte (4)
jose luis guillan suarez
il 27 Giu 2018
Modificato: jose luis guillan suarez
il 27 Giu 2018
1 Commento
Vishal Chandrahaas V
il 2 Apr 2020
Modificato: Vishal Chandrahaas V
il 2 Apr 2020
Nice Idea...
But, it's saying the following, and not working out for me.
Simulink cannot solve the algebraic loop containing 'Motor_trial/Gain' at time 5.0000000000000018 using the TrustRegion-based algorithm due to one of the following reasons: the model is ill-defined i.e., the system equations do not have a solution; or the nonlinear equation solver failed to converge due to numerical issues.
Elio Sánchez G.
il 30 Giu 2019
You can use a gain block and a derivative block
1 Commento
Vishal Chandrahaas V
il 2 Apr 2020
Do you mean this block??
Because there's an integrator block which has "1/s" on it, so I was expecting derivative block to has "s" or something like that....
Walter Roberson
il 23 Giu 2018
Instead of implementing it as a transfer function, implement it as a gain block.
4 Commenti
Nahid
il 21 Set 2022
Modificato: Walter Roberson
il 21 Set 2022
how can i Solved?
1 Commento
Walter Roberson
il 21 Set 2022
What is there to be solved? You have to create a model using transfer function blocks. It does not look to me as if you are expected to be able to "tune" the model or adjust the parameters at run-time. You would create a variable or parameter named that should contain the last two digits of your student ID, and use that in the model, but it is not something you need to adjust. This is just a straight forward case of creating the model.
You do need to figure out what each kind of block is. The ovals with the +- around them are summation blocks. I am not positive what the K block is, possibly a gain . Most of the other blocks are transfer function blocks.
Vedere anche
Categorie
Scopri di più su Classical Control Design in Help Center e File Exchange
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!