MPC cannot be designed in app
14 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
I have a Carsim S-functon as the plant model for a MPC. But I get an error saying "Plant model cannot be a pure direct feed-through system without additional dynamics". Why does it keep saying that?
4 Commenti
zhanglong zhang
il 11 Giu 2021
hello, i also have the problem,may you tell me how can i solve it? thank you.
Risposte (3)
Junhao Jiang
il 22 Apr 2020
The compatibility between CarSim and Simulink is not high,if you have the state space,you should use it,or you only choose the s-function to make it.
3 Commenti
Pacifique Turabimana
il 27 Dic 2021
How can I add CarSim S-Function in Simulink Library?
I tried to link CarSim with Simulink but nothing to do after because I can't find CarSim in Simulink library, I tried even online MATLAB but I can't be ab;e to continue working on my research. Please guide me to solve it.
Walter Roberson
il 27 Dic 2021
Unfortunately carsim.com does not appear to post their installation documentation online :(
Walter Roberson
il 11 Giu 2021
According to https://www.mathworks.com/matlabcentral/answers/473358-mpc-controller-direct-feedthrough-from-manipulated-variables-to-any-output-in-plant-is-not-allowed#comment_961921 you currently have an output that is being calcuated from an input signal with no modeled delay, but MPC does not permit that. You need to configure your model to take some time between input and output for all signals.
You can use delay blocks, or you can use a transfer function.
4 Commenti
MUHAMMAD
il 8 Dic 2023
Solution:
I had same problem and It is solve by adding time delay.
You can add time delay in between MV and plant. I did using matlab command like like
plant = tf([num],[den],'OutputDelay',1.5 )
I hope this answer helped you.
Example
%%Transfer Function By System identification
num = [-1.324 6.6e05 -6.914e09 5.128e13 -1.054e19]
den = [1 1.99e04 1.371e09 1.145e13 4.037e17]
plant = tf([num],[den],'OutputDelay',1.5 )
JGP
il 20 Mar 2024
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1647156/image.jpeg)
can you help me? Even if I use the delay or LTI system, the error continues.
How do I insert the Matlab code you mentioned into Simulink?
MUHAMMAD
il 8 Dic 2023
Solution:
I had same problem and It is solve by adding time delay.
You can add time delay in between MV and plant. I did using matlab command like like
plant = tf([num],[den],'OutputDelay',1.5 )
I hope this answer helped you.
Example
%%Transfer Function By System identification
num = [-1.324 6.6e05 -6.914e09 5.128e13 -1.054e19]
den = [1 1.99e04 1.371e09 1.145e13 4.037e17]
plant = tf([num],[den],'OutputDelay',1.5 )
0 Commenti
Vedere anche
Categorie
Scopri di più su Linear Plant Specification in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!