ERROR:iMPACT:2204 - Can only assign file to device 1

Hi all,

I have problem in loading .bit file to FPGA while veryfying FPGA in the loop using Matlab HDL Workflow Advisor or FIL verification Wizard. Iam using Spartan-6 XC6SLX45 board from Xilinx. The connection to the board is OK.

I encounter error at the end of loading process. "*ERROR:iMPACT:2204 - Can only assign file to device 1*" .The board is properly connected to the host computer with JTAG and Gigabit Ethernet Crossover Cable. I didn't find proper solution in other similar forums.

Please anybody can help me?

-Yam Siwakoti

***************************************************************************************
  Error MSG:
  ***************************************************************************************
 *  Loading bitstream failed with the following message:
*   Release 13.2 - iMPACT O.61xd (nt64)
*   Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved.
*   Preference Table
*   Name Setting
*   StartupClock Auto_Correction
*   AutoSignature False
*   KeepSVF False
*   ConcurrentMode False
*   UseHighz False
*   ConfigOnFailure Stop
*   UserLevel Novice
*   MessageLevel Detailed
*   svfUseTime false
*   SpiByteSwap Auto_Correction
*   AutoInfer false
*   SvfPlayDisplayComments false
*   INFO:iMPACT - Digilent Plugin: found 1 device(s).
*   INFO:iMPACT - Digilent Plugin: opening device: "Atlys", SN:210178399886
*   INFO:iMPACT - Digilent Plugin: User Name: Atlys
*   INFO:iMPACT - Digilent Plugin: Product Name: Atlys
*   INFO:iMPACT - Digilent Plugin: Serial Number: 210178399886
*   INFO:iMPACT - Digilent Plugin: Product ID: 00C0010C
*   INFO:iMPACT - Digilent Plugin: Firmware Version: 0305
*   INFO:iMPACT - Digilent Plugin: JTAG Port Number: 0
*   INFO:iMPACT - Digilent Plugin: JTAG Clock Frequency: 1600000 Hz
*   Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc6slx45, Version : 3
*   INFO:iMPACT:1777 -
*   Reading C:/Xilinx/13.2/ISE_DS/ISE/spartan6/data/xc6slx45.bsd...
*   INFO:iMPACT:501 - '1': Added Device xc6slx45 successfully.
*   ----------------------------------------------------------------------
*   ----------------------------------------------------------------------
*   done.
*   Elapsed time = 1 sec.
*   Elapsed time = 0 sec.
*   ERROR:iMPACT:2204 - Can only assign file to device 1.