Simulating an inverted pendulum
3 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
James Rhodes
il 31 Ago 2020
Commentato: James Rhodes
il 2 Ott 2020
Hi all,
I'm currently trying to see whether its possible to stabilise a physical inverted pendulum (3d printed) in realtime using matlab and simulink. Originally the project would have a way of changing the inverted pendulum's physical angle, however due to circumstances most will need to be done in simulation. I've created an angle detection program which computes the angle, and the time the angle was recorded at 30cycles/s. I'm wanting to use a PID controller to help control the system. Am I able to do the following process?:
physical inverted pendulum>webcam records>matlab computes time and angle>send time/angle data to simulink>PID to stabilise the pendulum>represent this on simulink inverted pendulum simulation
Or will i need to close the physical loop:
physical inverted pendulum>webcam records>matlab computes time and angle>send time/angle data to simulink>PID to stabilise the pendulum>send signal to driver board motor>change physical inverted pendulum angle
Here is a photo to show what the program records:
A = angle/timestamp recordings,
B = webcam info of real-world inverted pendulum
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/353861/image.png)
Any help would be greatly appreciated!
Thanks,
James
0 Commenti
Risposta accettata
Nitin Kapgate
il 16 Set 2020
Here is an example illustrating the implementation of the model of a 2-dimensional inverted pendulum controlled by a PID Controller in Simulink.
To open the 'vrpend' Simulink model, use the following command in your MATLAB command window
vrpend
Più risposte (0)
Vedere anche
Categorie
Scopri di più su Programmatic Tuning in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!