GUI slider value change when majorstep is changed from default?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Hello,
i experienced a very strange behaviour of GUI (made with GUIDE) sliders, If I change the major step of a vertical slider, e.g. 0.02 and the minor step is 0.01, the value of the slider changes from 0 to 0.08. The inspector in guide shows 0 for the value, but the thumbbar of the slider is not at the bottommost position. If i start the GUI, the thumbbar is still at the same position, and if i check the value of the slider, it is 0.08 instead of 0.
Test it with a blank gui, add a vertical slider:
- max: 1.0
- min: 0.0
- sliderstep: [0.01,0.02]
- x: 0.01
- y: 0.02
- value: 0.0
when you start the gui, the slider is value is not 0.0
6 Commenti
Risposte (3)
Azzi Abdelmalek
il 14 Gen 2013
Modificato: Azzi Abdelmalek
il 14 Gen 2013
% In your opening function insert
% slider1 is your slider's tag
set(handles.slider1,'value',0,'Min',0,'Max',1,'Sliderstep',[0.01,0.02])
4 Commenti
Azzi Abdelmalek
il 14 Gen 2013
Try this in this order
set(handles.slider1,'Min',0,'Max',1,'Sliderstep',[0.01,0.02])
set(handles.slider1,'value',0)
%or
set(handles.slider1,'Min',0,'Max',1,'Sliderstep',[0.01,0.02],'value',0)
0 Commenti
Image Analyst
il 15 Gen 2013
Modificato: Image Analyst
il 15 Gen 2013
I'm not able to reproduce. I displayed the value in the movement callback and it was exactly as expected: 0.01 after the first small click, and incrementing by 0.01 or 0.02 depending on where in the slider you clicked.
% --- Executes on slider movement.
function slider1_Callback(hObject, eventdata, handles)
% hObject handle to slider1 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% Hints: get(hObject,'Value') returns position of slider
% get(hObject,'Min') and get(hObject,'Max') to determine range of slider
sliderValue = get(hObject,'Value') % Spit value out to command line.
return;
The thumbbar of the slider also does not move when I change the step values. Since the value is 0 it stays slammed up against one side. I'm running R2012b 64 bit on Windows 7.
9 Commenti
Jan
il 18 Gen 2013
So would this be a work aorund?
set(handles.slider1, 'value', 1);
drawnow;
set(handles.slider1, 'value', 0);
Vedere anche
Categorie
Scopri di più su Migrate GUIDE Apps in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!