Design Cascaded Integrator-Comb (CIC) Filter
Filtering / Filter Designs
This block brings the filter design capabilities of the
to the Simulink® environment.
See CIC Filter Design — Main Pane for more information about the parameters of this block. The Data Types and Code Generation panes are not available for blocks in the DSP System Toolbox™ Filter Designs library.
This button opens the Filter Visualization Tool (
fvtool) from the
Processing Toolbox™ product. You can use the tool to display:
Magnitude response, phase response, and group delay in the frequency domain.
Impulse response and step response in the time domain.
The tool also helps you evaluate filter performance by providing information about filter order, stability, and phase linearity. For more information on FVTool, see the Signal Processing Toolbox documentation.
In its normal mode of operation, the CIC Filter block allows the adder’s numbers to wrap around. The Fixed-Point infrastructure then causes warnings to appear on the command line.
In this group, you specify your CIC filter format, such as the filter type and the differential delay.
Select whether your filter will be a
decimator or an
interpolator. Your choice
determines the type of filter and the design methods and
structures that are available to implement your filter.
interpolator activates the
Factor option. When you design an
interpolator, you enable the Output sample
When you design either a decimator or interpolator, the resulting filter is a CIC filter that decimates or interpolates your input signal.
Specify the differential delay of your CIC filter as an integer value greater than or equal to 1. The default value is 1. The differential delay changes the shape, number, and location of nulls in the filter response. Increasing the differential delay increases the sharpness of the nulls and the response between the nulls. In practice, differential delay values of 1 or 2 are the most common.
Specify the decimation or interpolation factor for your filter as an integer value greater than or equal to 1. The default value is 2.
Use this parameter to specify whether your frequency settings are
normalized or in absolute frequency. Select
(0–1) to enter frequencies in normalized form.
This behavior is the default. To enter frequencies in absolute
values, select one of the frequency units from the drop-down
GHz. Selecting one of the unit options
enables the Input sample rate parameter.
Fs, specified in the units you selected for Frequency units, defines the sampling frequency at the filter input. When you provide an input sampling frequency, all frequencies in the specifications are in the selected units as well. This parameter is available when you select one of the frequency options from the Frequency units list.
Fs, specified in the units you selected for Frequency units, defines the sampling frequency at the filter output. When you provide an output sampling frequency, all frequencies in the specifications are in the selected units as well. This parameter is available only when you design interpolators.
Enter the frequency at the end of the passband. Specify the value in either normalized frequency units or the absolute units you select in Frequency units.
Specify the units for any parameter you provide in magnitude specifications. From the drop-down list, select one of the following options:
Linear — Specify the
magnitude in linear units.
dB — Specify the
magnitude in decibels (default).
Squared — Specify
the magnitude in squared units.
Enter the filter attenuation in the stopband in the units you choose for Magnitude units, either linear or decibels.
Select this check box to implement the filter as a subsystem of basic Simulink blocks. Clear the check box to implement the filter as a high-level subsystem. By default, this check box is cleared.
The high-level implementation provides better compatibility across various filter structures, especially filters that would contain algebraic loops when constructed using basic elements.
When the Filter type parameter specifies a multirate filter, select the rate processing rule for the block from following options:
Enforce single-rate processing
— When you select this option, the block maintains
the sample rate of the input.
Allow multirate processing
— When you select this option, the block adjusts the
rate at the output to accommodate an increased or reduced
number of samples. To select this option, you must set the
Input processing parameter to
Elements as channels (sample
See the Data Types Pane subsection of the
filterBuilder function reference
page for more information about specifying data type parameters.
|Port||Supported Data Types|