Main Content

Tapped Delay Resettable Synchronous

Delay scalar signal multiple sample periods and output all delayed versions when external Reset signal is false

Since R2023a

  • Tapped Delay Resettable Synchronous Block

Libraries:
HDL Coder / Discrete

Description

The Tapped Delay Enabled Synchronous block delays an input by the specified number of sample periods. The block returns an output signal for each delay when the external Reset signal R is false.

For example, when you specify Number of delays as 4 and Order output starting with as Oldest, the block returns four signals, the first delayed by four sample periods, the second delayed by three, and so on. Use this block to discretize a signal in time domain or resample a signal.

Output Vector Order

The block accepts one scalar input and generates an output vector that contains data for each incremental delay. Specify the order of the delayed signals in the output vector with the Order output vector starting with parameter:

  • Oldest orders the output vector starting with the oldest delay version and ending with the newest delay version.

  • Newest orders the output vector starting with the newest delay version and ending with the oldest delay version.

Specify the output vector for the first sampling period with the Initial condition parameter. Careful selection of this parameter can mitigate unwanted output behavior.

Synchronous State Control

The block uses synchronous state control semantics. When you use this block in your model and generate HDL code by using HDL Coder™, your model generates cleaner HDL code and uses fewer hardware resources due to the Synchronous behavior of the block.

Examples

Limitations

  • The block does not support vector inputs on the Enable port.

  • You cannot use the block inside Enabled Subsystem, Triggered Subsystem, or Resettable Subsystem blocks that use Classic semantics. The Subsystem must use Synchronous semantics.

Ports

Input

expand all

Input signal to delay.

Data Types: half | single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | Boolean | fixed point
Complex Number Support: Yes

The block accepts the Reset signal of the data types listed below. For more information, see Data Types Supported by Simulink.

When the Reset signal is true, the state and output signal take the value of the Initial condition parameter. The Reset signal is true when R is not zero and false when R is zero.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean | fixed point

Output

expand all

All versions of the delayed input signal. Use the Order output vector starting with parameter to specify the order of delayed signals in the output vector.

Data Types: half | single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | Boolean | fixed point

Parameters

expand all

Specify the initial output of the simulation. The Initial condition parameter is converted from a double to the input data type offline using round-to-nearest and saturation.

Limitations

The initial condition of this block cannot be inf or NaN.

Programmatic Use

Block Parameter: vinit
Type: character vector
Values: scalar
Default: '0.0'

Specify the time interval between samples. To inherit the sample time, set this parameter to -1. For more information, see Specify Sample Time.

Programmatic Use

Block Parameter: samptime
Type: character vector
Values: scalar | vector
Default: '-1'

Specify the number of discrete-time operators as a positive scalar, or -1 for inherited.

A value of -1 instructs the block to inherit the number of delays by backpropagation. Each delay is equivalent to the z-1 discrete-time operator, which the Unit Delay block represents.

Programmatic Use

Block Parameter: NumDelays
Type: character vector
Values: positive scalar | -1 (inherited)
Default: '4'

Specify whether to output the oldest delay version first, or the newest delay version first.

Programmatic Use

Block Parameter: DelayOrder
Type: character vector
Values: 'Oldest' | 'Newest'
Default: 'Oldest'

Select this check box to include the current input in the output vector.

Programmatic Use

Block Parameter: includeCurrent
Type: character vector
Values: 'off' | 'on'
Default: 'off'

Extended Capabilities

Version History

Introduced in R2023a