listparam

List valid parameters for specified circuit object

Syntax

listparam(h)

Description

listparam(h) lists the valid parameters for the specified circuit object h.

Note

Before calling listparam function, you must use the analyze function to perform a frequency domain analysis for the circuit object.

Examples

List Parameters of Network Object

List the available parameters of analysis of a transmission line.

trl = rfckt.txline;
f = [1e9:1.0e7:3e9];
analyze(trl,f);
listparam(trl)

ans = 28×1 cell
    {'S11'       }
    {'S12'       }
    {'S21'       }
    {'S22'       }
    {'GroupDelay'}
    {'GammaIn'   }
    {'GammaOut'  }
    {'VSWRIn'    }
    {'VSWROut'   }
    {'OIP3'      }
    {'IIP3'      }
    {'NF'        }
    {'NFactor'   }
    {'NTemp'     }
    {'TF1'       }
    {'TF2'       }
    {'TF3'       }
    {'Gt'        }
    {'Ga'        }
    {'Gp'        }
    {'Gmag'      }
    {'Gmsg'      }
    {'GammaMS'   }
    {'GammaML'   }
    {'K'         }
    {'Delta'     }
    {'Mu'        }
    {'MuPrime'   }

Input Arguments

h — RF circuit or data object

object handle

RF circuit or data object, specified as an object handle.

Several parameters are available for all objects. When you import rfckt.amplifier, rfckt.mixer, or rfdata.data object specifications from a .p2d or .s2d file, the list of valid parameters also includes any operating conditions from the file that have numeric values, such as bias.

This table describes the most commonly available parameters.

Parameter	Description
S11, S12, S21, S22 LS11, LS12, LS21, LS22 (Amplifier and mixer objects with multiple operating conditions only)	S-parameters
GroupDelay	Group delay
GammaIn, GammaOut	Input and output reflection coefficients
VSWRIn, VSWROut	Input and output voltage standing-wave ratio
IIP3, OIP3 (Amplifier and mixer objects only)	Third-order intercept point
NF	Noise figure
TF1	Ratio of the load voltage to the output voltage of the source when the input port is conjugate matched
TF2	Ratio of load voltage to the source voltage
Gt Ga Gp Gmag Gmsg	Transducer power gain Available power gain Operating power gain Maximum available power gain Maximum stable gain
GammaMS, GammaML	Source and load reflection coefficients for simultaneous conjugate match
K, Mu, MuPrime	Stability factor
Delta	Stability condition

Version History

Introduced before R2006a