Main Content

detach

Detach target robot platform from source robot platform

Since R2023a

    Description

    example

    detach(platform) detaches the attached, non-rigidBodyTree-based platform from the rigidBodyTree-based source robot platform platform.

    Examples

    collapse all

    Create a robotScenario object.

    scenario = robotScenario(UpdateRate=1,StopTime=10);

    Create a rigidBodyTree object of the Franka Emika Panda manipulator using loadrobot.

    robotRBT = loadrobot("frankaEmikaPanda");

    Create a rigidBodyTree-based robotPlatform object using the manipulator model.

    robot = robotPlatform("Manipulator",scenario, ...
                          RigidBodyTree=robotRBT);

    Create a non-rigidBodyTree-based robotPlatform object of a box to manipulate. Specify the mesh type and size.

    box = robotPlatform("Box",scenario,Collision="mesh", ...
                        InitialBasePosition=[0.5 0.15 0.278]);
    updateMesh(box,"Cuboid",Collision="mesh",Size=[0.06 0.06 0.1])

    Visualize the scenario.

    ax = show3D(scenario,Collisions="on");
    view(79,36)
    light

    Specify the initial and the pick-up joint configuration of the manipulator, to move the manipulator from its initial pose to close to the box.

    initialConfig = homeConfiguration(robot.RigidBodyTree);
    pickUpConfig = [0.2371 -0.0200 0.0542 -2.2272 0.0013 ...
                    2.2072 -0.9670 0.0400 0.0400];

    Create an RRT path planner using the manipulatorRRT object, and specify the manipulator model.

    planner = manipulatorRRT(robot.RigidBodyTree,scenario.CollisionMeshes);
    planner.IgnoreSelfCollision = true;

    Plan the path between the initial and the pick-up joint configurations. Then, to visualize the entire path, interpolate the path into small steps.

    rng("default")
    path = plan(planner,initialConfig,pickUpConfig);
    path = interpolate(planner,path,25);

    Set up the simulation.

    setup(scenario)

    Check the collision before manipulator picks up the box.

    checkCollision(robot,"Box", ...
                   IgnoreSelfCollision="on")
    ans = logical
       0
    
    

    Move the joints of the manipulator along the path and visualize the scenario.

    helperRobotMove(path,robot,scenario,ax)

    Check the collision after manipulator picks up the box.

    checkCollision(robot,"Box", ...
                   IgnoreSelfCollision="on")
    ans = logical
       1
    
    

    Use the attach function to attach the box to the gripper of the manipulator.

    attach(robot,"Box","panda_hand", ...
           ChildToParentTransform=trvec2tform([0 0 0.1]))

    Specify the drop-off joint configuration of the manipulator to move the manipulator from its pick-up pose to the box drop-off pose.

    dropOffConfig = [-0.6564 0.2885 -0.3187 -1.5941 0.1103 ...
                     1.8678 -0.2344 0.04 0.04];

    Plan the path between the pick-up and drop-off joint configurations.

    path = plan(planner,pickUpConfig,dropOffConfig);
    path = interpolate(planner,path,25);

    Move the joints of the manipulator along the path and visualize the scenario.

    helperRobotMove(path,robot,scenario,ax)

    Use the detach function to detach the box from the manipulator gripper.

    detach(robot)

    Plan the path between the drop-off and initial joint configurations to move the manipulator from its box drop-off pose to its initial pose.

    path = plan(planner,dropOffConfig,initialConfig);
    path = interpolate(planner,path,25);

    Move the joints of the manipulator along the path and visualize the scenario.

    helperRobotMove(path,robot,scenario,ax)

    Helper function to move the joints of the manipulator.

    function helperRobotMove(path,robot,scenario,ax)
        for idx = 1:size(path,1)
            jointConfig = path(idx,:);
            move(robot,"joint",jointConfig)
            show3D(scenario,fastUpdate=true,Parent=ax,Collisions="on");
            drawnow
            advance(scenario);
        end
    end

    Input Arguments

    collapse all

    rigidBodyTree-based source platform, specified as a robotPlatform object.

    Version History

    Introduced in R2023a