Analyze Models for Standards Compliance and Design Errors
Standards and Analysis Overview
During model development, check and analyze your model to increase confidence in its quality. Check your model against standards such as MAB style guidelines and high-integrity system design guidelines such as DO-178 and ISO 26262. Analyze your model for errors, dead logic, and conditions that violate required properties. Using the analysis results, update your model and document exceptions. Report the results using customizable templates.
Check Model for Style Guideline Violations and Design Errors
This example shows how to use the Model Advisor to check a cruise control model for MathWorks® Advisory Board (MAB) style guideline violations and design errors. Select checks and run the analysis on the model. Iteratively debug issues using the Model Advisor and rerun checks to verify that it is in compliance. After passing your selected checks, report results.
Check Model for MAB Style Guideline Violations
In Model Advisor, you can check that your model complies with MAB modeling guidelines.
Create a copy of the project in a working folder. On the command line, enter
path = fullfile(matlabroot,'toolbox','shared','examples',... 'verification','src','cruise') run(fullfile(path,'slVerificationCruiseStart'))
Open the model. On the command line, enter
In the Modeling tab, select Model Advisor.
Click OK to choose
simulinkCruiseErrorAndStandardsExamplefrom the System Hierarchy.
Check your model for MAB style guideline violations using Simulink® Check™.
In the left pane, in the By Product > Simulink Check > Modeling Standards > MAB Checks folder, select:
Check Indexing Mode
Check model diagnostic parameters
Right-click on the MAB Checks node and select Run Selected Checks.
To review the configuration parameter settings that violate MAB style guidelines, run the Check model diagnostic parameters check.
The analysis results appear in the right pane on the Report tab. Report displays the violation details and the recommended action.
Click the parameter hyperlinks, which opens the Configuration Parameters dialog box, and update the model diagnostic parameters. Save the model.
To verify that your model passes, rerun the check. Repeat steps from
e, if necessary, to reach compliance.
To generate a results report of the Simulink Check checks, select the MAB Checks node, and then, from the toolstrip, clickReport.
Check Model for Design Errors
While in the Model Advisor, you can also check your model for hidden design errors using Simulink Design Verifier™.
In the left pane, in the By Products > Simulink Design Verifier folder, select Design Error Detection.
If not already checked, click the box beside Design Error Detection. All checks in the folder are selected.
From the tool strip, click Run Check.
After the Model Advisor analysis, from the tool strip, click Report. This generates a HTML report of the check analysis.
In the generated report, click a Simulink Design Verifier Results Summaryhyperlink. The dialog box provides tools to help you diagnose errors and warnings in your model.
Review the analysis results on the model. Click the
Compute target speedsubsystem. The Simulink Design Verifier Results Inspector window provides derived ranges that can help you understand the source of an error by identifying the possible signal values.
Review the harness model or create one if it does not already exist.
View tests and export test cases.
Review the analysis report. To see a detailed analysis report, click HTML or PDF.