Main Content

AXI4 Master Sink

Receive random access memory data

  • AXI4 Master Sink block

Libraries:
SoC Blockset / Hardware Logic Testbench

Description

The AXI4 Master Sink block receives random access memory data from AXI4-based data interface blocks. You can use this block as a test sink block for simulating AXI4-based data applications.

The block accepts data along with a control bus and outputs a control bus.

Examples

Ports

Input

expand all

Input data from the data source. This value must be a scalar or vector.

Before reading the data, set the required data type. To set the data type, see the Data type parameter.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | fixed point

Input control bus from the data producer, specified as a bus. This control bus comprises these control signals:

  • rd_aready — Indicates the data source accepted the read request

  • rd_dvalid — Indicates the data returned for the read request is valid

Data Types: ReadControlS2MBusObj

Output

expand all

Output control bus to the data source indicating the block is ready to accept data, returned as a scalar. This control bus comprises these control signals:

  • rd_addr — Starting address for the read transaction that is sampled at the first cycle of the transaction

  • rd_len — Number of data values you want to read, sampled at the first cycle of the transaction

  • rd_avalid — Control signal that specifies whether the read request is valid

  • rd_dready — Control signal that indicates when the block can read data

Data Types: ReadControlM2SBusObj

Parameters

expand all

Select the data type format for the input AXI data.

Click the button to display the Data Type Assistant, which helps you to set the data type for the rdData input port. For details, see Specify Data Types Using Data Type Assistant.

Specify the dimensions of the input data as a positive scalar or an array. This value defines the size of the data signal.

Example: 1 specifies a scalar sample.

Example: [10 1] specifies a vector of ten scalars.

Select this parameter to enable data packing across the last dimension of the signal. The Memory Channel block packs the data along the last dimension of the signal. For example, if the channel data type is uint32, the dimensions are [1024 4], and if you select this parameter, then the memory channel generates 1024 read or write transactions of 128 bits. For this example, if you clear this sample packing parameter, the memory channel generates 4096 transactions of 32 bits each.

This figure shows how data is aligned for a signal with data type fixdt10[4x3]. When the data is packed, three 10-bit words are concatenated and extended by 2 bits to a 32-bit sample. When the data is not packed, each 10-bit word is extended to a 16-bit sample.

The top row shows packed data aligned in samples of 10,10,10, and 2 to make 32 bits. The bottom row shows unpacked data aligned in samples of 10 and 6 to make 16 bits.

This figure shows how data is aligned for a signal with data type uint8[8x3]. When the data is packed, three 8-bit words are concatenated and extended by 8 bits to a 32-bit sample. When the data is not packed, each 8-bit word is represented as an 8-bit sample.

The top row shows packed data aligned in samples of 8,8,8, and 8 to make 32 bits. The bottom row shows unpacked data aligned in samples of 8 bits.

The combined width of the flattened signal must not exceed 512 bits.

Specify the number of read requests for the block to send.

Specify the address from which the block reads the data. This value must be a nonnegative integer.

Specify the initial time after which the read operation starts.

Specify a time interval in seconds to define how often the block updates.

Specify the Sample time parameter as a scalar when you do not want the output to have a time offset. To add a time offset to the output, specify the Sample time parameter as a 1-by-2 vector where the first element is the sampling period and the second element is the offset. For more information about sample times in Simulink®, see Specify Sample Time.

Select this parameter to save the input data to the MATLAB® workspace.

Specify the workspace variable to which input data is saved. This parameter can be any MATLAB-supported variable name.

Dependencies

To enable this parameter, select the Save data in workspace parameter.

Version History

Introduced in R2019a