There is no visualization in the animation window mechanics explorers?
13 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Aleksandr Panov
il 6 Feb 2014
Hi! I Decided to start using SimMechanics and faced with the problem of visualization in Mechanics Explorers. As an example, open a standard project Robot Arm Model and run it. Robot animation is not shown.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/156294/image.jpeg)
What's the problem?
Windows 7, MatLab/Simulink 2013b x64, SimMechanics 4.3. Intel Core i5, Nvidia GTX 660 Ti.
Thanks!
2 Commenti
nour islam mokhtari
il 25 Feb 2016
Hi there, plz I m facing the same problem...If you found a solution share it here ? Thanks in advance :)
Risposta accettata
Christoph Hahn
il 22 Mar 2016
Hi Aleksandr,
you can switch of the visualization in the Mechanics Explorer. Just have a look at the attached screenshots.
- Click the gear icon
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/173787/image.jpeg)
- Go to SimMechanics 2G -> Explorer and switch visualization on/off.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/173789/image.jpeg)
Best regards, Christoph
3 Commenti
Arafat Mukasa
il 23 Nov 2017
I faced the same challenge and this is how i solved it. Hopes it helps. Always ensure that the CAD models and the simscape multibody model are in the same current folder in matlab/simulink. Please refer to the screenshots below. As you can see from the current folder, the different parts of my CAD model (for example frame.SLDPRT) are in the same folder with the simscape multibody model (quadrotor_complete.slx).
Assuming all the above is in place and still the visualization is blank, then do the following with guidance from the screenshot attached; Choose a part of your model (in my case it were frame_1_RIGID), right click and then select show everything.
Rony Rony
il 24 Apr 2020
The explorer open but the animation were not visualize , no component had been shown a gray screen is only visible @ Christoph Hahn
Più risposte (4)
Arafat Mukasa
il 23 Nov 2017
I faced the same challenge and this is how i solved it. Hopes it helps. Always ensure that the CAD models and the simscape multibody model are in the same current folder in matlab/simulink. Please refer to the screenshots below. As you can see from the current folder, the different parts of my CAD model (for example frame.SLDPRT) are in the same folder with the simscape multibody model (quadrotor_complete.slx).
Assuming all the above is in place and still the visualization is blank, then do the following with guidance from the screenshot attached; Choose a part of your model (in my case it were frame_1_RIGID), right click and then select show everything.
0 Commenti
Damian Keretic
il 7 Apr 2020
Did someone find the way to solve this problem? I have exactly the same situation. Visualization is just blank grey window.
I tried the thing that Arafat Mukasa proposed but it doesn't work.
2 Commenti
saleh fahjan
il 9 Apr 2020
same problem, tried to do thing up here nothing changed still no visualiziation any help ?
Rony Rony
il 24 Apr 2020
hello did you get the sollution I have the same problem, please inform me if you got the solution.
Xinyang Tian
il 17 Mag 2020
Modificato: Xinyang Tian
il 17 Mag 2020
Hi,gays,i have some solutions to solve this problem ~
1.Disabling the Geforce driver from device manager
2.Check the name of your simulink model,make sure there are no garbled codes. The following figures shows the specific check steps.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/293556/image.jpeg)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/293557/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/293558/image.jpeg)
Hope to help those in need.
0 Commenti
George
il 2 Mag 2024
Mechanics Explorer doesn's seem to work if you are in Accelerator mode. Run simulation in normal mode and it should pop up. At least, that was the problem with my version.
0 Commenti
Vedere anche
Categorie
Scopri di più su Simulation and Analysis in Help Center e File Exchange
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!