generating a half wave sinusoid using Simulink
12 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
I am pretty bad at using Simulink and have tried for days to obtain a half wave sinusoid of the following equation: I(t)=360sin(pi*t/0.4), 0<=t<=0.4 I(t)=0, 0.4<t<=1
I just used a Sine block of amplitude=360 and frequency of 7.85 rad/sec together with a pulse generator block and multiply them together.
Any suggestions? I want to get the one in blue but I only got the one in yellow. :(
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/145604/image.jpeg)
0 Commenti
Risposte (1)
Rick Rosson
il 5 Ott 2014
Modificato: Rick Rosson
il 5 Ott 2014
Try feeding the output of the Sine Wave block to the input of a Saturation block. Set the lower limit to 0 and the upper limit to inf.
2 Commenti
Rick Rosson
il 5 Ott 2014
Modificato: Rick Rosson
il 6 Ott 2014
Please check the Max step size parameter in the Solver Pane. My guess is that it is set either to auto or to a value that is too large relative to the period of the sine wave. With the sine wave having a period of 0.8 seconds, I would recommend that you set the max step size to 0.02 or even 0.01 seconds so that you will have high enough time resolution to represent the sine wave as a smooth curve.
Vedere anche
Categorie
Scopri di più su Sources in Help Center e File Exchange
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!