Connecting a PS converter block to a valve actuator and and a sine signal source
2 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Following the existing tutorial I am trying to build following model for simulation:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/900585/image.png)
Unfortunately the converter block on the left side won't connect properly between the two next elements. I am only able to connect the valve acutator to the input of the converter block, that is, where the sine wave is supposed to be:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/900590/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/900595/image.png)
Does anyone has a clue?
Thanks in advance.
0 Commenti
Risposte (1)
Sabin
il 2 Ott 2023
There are two blocks that can be used as interfaces between Simscape and Simulink, PS-Simulink Converter and Simulink-PS Converter. As you want to send a Simulink signal to a Simscape network, the block you need to use is the Simulink-PS Converter.
0 Commenti
Vedere anche
Categorie
Scopri di più su Upgrading Hydraulic Models to Use Isothermal Liquid Blocks in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!