Info
Questa domanda è chiusa. Riaprila per modificarla o per rispondere.
when i write data to things speak using arduino mkr1000 i sent the data to thingspeak but every time to start data transmission i need to run serial monitor in arduino code.
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
iam attaching the code here and once after uploading the code to arduino and i started serial monitor the values are displayed in thingsspeak but once i try to connect it to a battery /unplug and plug it, i need to again run the serial monitor to view the data in thingsspeak. i would like to use a battery as power supply after uploading the code to arduino.
/*
WriteSingleField
Description: Writes a value to a channel on ThingSpeak every 20 seconds.
Hardware: Arduino MKR1000
!!! IMPORTANT - Modify the secrets.h file for this project with your network connection and ThingSpeak channel details. !!!
Note:
- Requires WiFi101 library version 0.15.3 or newer.
- This example is written for a network using WPA encryption. For WEP or WPA, change the WiFi.begin() call accordingly.
ThingSpeak ( https://www.thingspeak.com ) is an analytic IoT platform service that allows you to aggregate, visualize, and
analyze live data streams in the cloud. Visit https://www.thingspeak.com to sign up for a free account and create a channel.
Documentation for the ThingSpeak Communication Library for Arduino is in the README.md folder where the library was installed.
See https://www.mathworks.com/help/thingspeak/index.html for the full ThingSpeak documentation.
For licensing information, see the accompanying license file.
Copyright 2020, The MathWorks, Inc.
*/
#include <WiFi101.h>
#include "secrets.h"
#include "ThingSpeak.h" // always include thingspeak header file after other header files and custom macros
char ssid[] = SECRET_SSID; // your network SSID (name)
char pass[] = SECRET_PASS; // your network password
int keyIndex = 0; // your network key Index number (needed only for WEP)
WiFiClient client;
unsigned long myChannelNumber = SECRET_CH_ID;
const char * myWriteAPIKey = SECRET_WRITE_APIKEY;
int number = 0;
#define sensorPin A1
void setup() {
Serial.begin(9600); // Initialize serial
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo native USB port only
}
ThingSpeak.begin(client); // Initialize ThingSpeak
}
void loop() {
// Connect or reconnect to WiFi
if(WiFi.status() != WL_CONNECTED){
Serial.print("Attempting to connect to SSID: ");
Serial.println(SECRET_SSID);
while(WiFi.status() != WL_CONNECTED){
WiFi.begin(ssid, pass); // Connect to WPA/WPA2 network. Change this line if using open or WEP network
Serial.print(".");
delay(1000);
}
Serial.println("\nConnected.");
}
int reading = analogRead(sensorPin);
// Convert the reading into voltage:
float voltage = reading * (5000 / 1024.0);
// Convert the voltage into the temperature in degree Celsius:
float temp = voltage / 100;
// Print the temperature in the Serial Monitor:
//Serial.print(temp);
//Serial.print(" \xC2\xB0"); // shows degree symbol
//Serial.println("C");
// Write to ThingSpeak. There are up to 8 fields in a channel, allowing you to store up to 8 different
// pieces of information in a channel. Here, we write to field 1.
int x = ThingSpeak.writeField(myChannelNumber, 1, temp, myWriteAPIKey);
if(x == 200){
Serial.println("Channel update successful.");
}
else{
Serial.println("Problem updating channel. HTTP error code " + String(x));
}
// change the value
number++;
if(number > 99){
number = 0;
}
delay(20000); // Wait 20 seconds to update the channel again
}
0 Commenti
Risposte (0)
Questa domanda è chiusa.
Vedere anche
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!