Simulink PV panel comonents names

Anyone know the name of these parts, Thanks

Answer 1

[Vidip]

Based on the image of the model, blocks which are present in it are –

• Controlled Current Source - The Controlled Current Source block converts the Simulink® input signal into an equivalent current source. The generated current is driven by the input signal of the block. The positive current direction is as shown by the arrow in the block icon.
• Ramp - The Ramp block generates a signal that starts at a specified time and value and changes by a specified rate. The block's Slope, Start time, and Initial output parameters determine the characteristics of the output signal.
• Saturation - The Saturation block produces an output signal that is the value of the input signal bounded to the upper and lower saturation values. The upper and lower limits are specified by the parameters Upper limit and Lower limit.

For further information, refer to the documentation links below:

• https://in.mathworks.com/help/sps/powersys/ref/controlledcurrentsource.html
• https://in.mathworks.com/help/simulink/slref/ramp.html
• https://in.mathworks.com/help/simulink/slref/saturation.html