i get this error "attempting to load ybus script as a function"
15 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Adegoke Williams
il 28 Set 2022
Commentato: A.B.M. NOUSHAD BHUIYAN
il 17 Apr 2024 alle 18:02
i have added the ybus.m in the command window byt when i try to run the fuction it gives an error message "attempting to load script as a function"
2 Commenti
Geoff Hayes
il 29 Set 2022
@Adegoke Williams - are you referring to the code from the File Exchange found here? Please clarify what you mean by "added the ybus.m in the command window" and show how you are "running the function". Also, please copy and paste the full error message to this post.
Risposta accettata
David Hill
il 29 Set 2022
Not sure what you are doing, but works fine for me.
z = [0, 1, 0, 1.0; 0, 2, 0, 0.8; 1, 2, 0, 0.4; 1, 3, 0, 0.2; 2, 3, 0, 0.2; 3, 4, 0, 0.08];
y=Ybus(z)
function[Ybus] = Ybus(zdata)
nl=zdata(:,1); nr=zdata(:,2); R=zdata(:,3); X=zdata(:,4);
nbr=length(zdata(:,1)); nbus = max(max(nl), max(nr));
Z = R + j*X; %branch impedance
y= ones(nbr,1)./Z; %branch admittance
Ybus=zeros(nbus,nbus); % initialize Ybus to zero
for k = 1:nbr; % formation of the off diagonal elements
if nl(k) > 0 & nr(k) > 0
Ybus(nl(k),nr(k)) = Ybus(nl(k),nr(k)) - y(k);
Ybus(nr(k),nl(k)) = Ybus(nl(k),nr(k));
end
end
for n = 1:nbus % formation of the diagonal elements
for k = 1:nbr
if nl(k) == n | nr(k) == n
Ybus(n,n) = Ybus(n,n) + y(k);
else, end
end
end
end
6 Commenti
A.B.M. NOUSHAD BHUIYAN
il 17 Apr 2024 alle 18:02
Can you help me to find Y bus admittance matrix for the following "z=[
0 1 0 0.0608 %GEN 1: From ground to bus 1
0 2 0 0.1198 %GEN 2: From ground to bus 2
0 3 0 0.1813 %GEN 3: From ground to bus 3
0 5 0.6841 0.2737 % Transmission line from ground to bus 5
0 6 1.0262 0.3421 % Transmission line from ground to bus 6
0 8 0.9196 0.3219 % Transmission line from ground to bus 8
1 4 0 0.0576 % Transformer from bus 1 to bus 4
2 7 0 0.0625 % Transformer from bus 2 to bus 7
3 9 0 0.0586 % Transformer from bus 3 to bus 9
4 5 0.101 0.085 % Transmission line from bus 4 to bus 5
4 6 0.017 0.092 % Transmission line from bus 4 to bus 6
5 7 0.032 0.161 % Transmission line from bus 5 to bus 7
6 9 0.039 0.170 % Transmission line from bus 6 to bus 9
7 8 0.0085 0.072 % Transmission line from bus 7 to bus 8
8 9 0.0119 0.1008 % Transmission line from bus 8 to bus 9
0 4 0 -1/(0.088+0.079) % Shunt capacitance at bus 4
0 5 0 -1/(0.088+0.153) % Shunt capacitance at bus 5
0 6 0 -1/(0.079+0.179) % Shunt capacitance at bus 6
0 7 0 -1/(0.153+0.0745) % Shunt capacitance at bus 7
0 8 0 -1/(0.0745+0.1045)% Shunt capacitance at bus 8
0 9 0 -1/(0.1045+0.179) % Shunt capacitance at bus 9
]
y=Ybus(zdata)
"
Più risposte (0)
Vedere anche
Categorie
Scopri di più su Simulation and Analysis in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!